Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
Air compressor safety management measures 1, air compressor must have a pressure gauge and safety valve. The pressure gauge must be calibrated regularly. The safety valve and pressure regulator must act reliably, and the operating pressure of the safety valve shall not exceed 1.1 times of the rated pressure. Use of oil
What is the reason why the head of the oil-free air compressor shakes badly when the air pressure is high! The reasons for the large vibration of the air compressor are as follows: (1) The motor is not in the middle of the air compressor. (2) low oil temperature. (3) The air compressor body is damaged. (4
Vibration is inevitable in the operation of the air compressor, but we can reduce the vibration of the air compressor through certain measures. What are the factors that affect the vibration of the air compressor? How can we reduce the vibration of the air compressor? First, let's talk about the influence of the vibration of the air compressor.
Air compressor in the normal operation, vibration is inevitable, but in the operation of the vibration is too large, will cause serious harm to the air compressor, the following air compressor vibration reasons are analyzed as follows: 1. start-up operation after the vibration: unit start
Minor maintenance only needs to replace the air compressor oil and oil filter, which is usually replaced after 500 hours of operation of the new machine. Major maintenance is carried out about 3000 hours of operation of the machine, and the air filter element of the air compressor, oil and gas separator core, motor grease, etc. Air compressor recommended
With the rapid development of industry, society's requirements for the required products have been greatly improved; at the same time, the improvement of the precision of pneumatic components has prompted higher and higher requirements for compressed gas oil and water content. In the past, all oil-free air compressors New products are greatly constrained by quality problems
The scroll compressor is a kind of positive displacement compression compressor, and the compression part is composed of a movable scroll and a fixed scroll. According to the shape of the working chamber and moving parts, the positive displacement compressor can be divided into "reciprocating" and "rotary"
Scroll air compressor and screw air compressor are all volumetric rotary compressors. The scroll air compressor uses the meshing of the rotor and the stator to form multiple compression chambers. With the translation and rotation of the rotor, the volume of each compression chamber is constantly changing to realize the suction of gas
The compressor does not belong to, and the air storage tank matched with the air compressor belongs. Compressor dynamic equipment does not belong to special equipment, but as long as the working pressure of the gas storage tank and the connected pipeline is greater than or equal to 0.1Mpa, the volume and pipe diameter are greater than or equal to 25mm, it belongs to special equipment. If you are
Gas tank and pressure pipe are short for two kinds of equipment. If you buy back a simple pressure vessel, you do not need special equipment installation qualification, free of record. However, the accessory box (pressure gauge and safety valve) of the gas tank is of strong inspection type. Six general pressure gauges
