Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
The air compressor belongs to the general mechanical type. The air compressor (English: air compressor) is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy.
Structure and working principle 1. Piston type oil-free lubrication air compressor Piston type oil-free lubrication air compressor is composed of compressor host, cooling system, adjustment system, lubrication system, safety valve, motor and control equipment. Compressor
The simplest point is to see whether it contains a frequency converter, and the second is to see whether the motor changes its speed according to the actual working conditions during operation. There are nameplates on the air compressor. You can see the nameplates. Look at the rated speed on the nameplate of the motor
With the wide application of screw air compressor and the increasing demand of the market, oil-free screw air compressor has become more and more popular in the market in recent years. There are also many customers who will ask questions about oil-free screw air compressors. Today, the editor is simple with everyone.
Air compressors are used to compress gas. The compressor is similar in construction to a water pump. Most air compressors are reciprocating piston type, rotating blades or rotating screws, and their noise control mainly adopts three aspects: muffler, muffler tunnel and sound insulation technology.
The maintenance of the screw air compressor is somewhat similar to that of the car. The machine will be maintained for the first time after 500 hours of operation, and then the maintenance is once every 2000 hours. The first guarantee needs to replace the oil (also known as lubricating oil) and the oil filter element. After that
Q: air consumption of equipment and air compressor selection? Answer: according to the air consumption of equipment to choose air compressor first consider two points: 1, the pressure problem, need to understand the normal use of all equipment pressure range, take the maximum and minimum, and then according to the maximum increase of 1kg pressure to select the air compressor.
Judging from the oil content, oil-free and oil-free in the air compressor generally refer to the oil content of the gas discharged from the exhaust port of the air compressor. Generally, the oil content of the oil compressor is relatively large, and the oil content of the oil-free oil compressor is 0.01ppm. Therefore, this oil content is used to distinguish oil-free and oil-free in the air compressor.
There is a reason for the failure of permanent magnet variable frequency air compressor. When the equipment fails, we must quickly find out the cause of the failure, restore the normal operation of the machine as soon as possible, and reduce the loss of the factory. Common Faults and Solutions of Permanent Magnet Variable Frequency Screw Air Compressor
Oil-free air compressor common fault maintenance: 1, oil-free air compressor intermittent work, insufficient gas supply. The reason for this failure is: insufficient voltage. Starting from the buzzing sound, if the current running current is greater than 5: 00 a.m. (ordinary 520 watts and 840 watts without oil or oil
