2026-04-09Views：
The compressor does not belong to, and the air storage tank matched with the air compressor belongs.
Compressor dynamic equipment does not belong to special equipment, but as long as the working pressure of the gas storage tank and the connected pipeline is greater than or equal to 0.1Mpa, the volume and pipe diameter are greater than or equal to 25mm, it belongs to special equipment. If the air compressor you use belongs to the pressure vessel in the equipment specified in the supplementary provisions of the national "special equipment safety supervision regulations", your operator should consult the operator examination organization with the special equipment safety supervision department of the local bureau of quality and technical supervision, and then obtain the qualification certificate. The pressure vessel stipulated in the Regulations refers to the closed equipment containing gas or liquid and bearing a certain pressure, and its scope is specified as the fixed vessel and mobile vessel for gas, liquefied gas and liquid with the maximum working pressure greater than or equal to 0.1MPa (gauge pressure) and the product of pressure and volume greater than or equal to 2.5MPa · L; gas cylinders and oxygen chambers with nominal working pressure greater than or equal to 0.2MPa (gauge pressure) and the product of pressure and volume greater than or equal to 1.0MPa · L, liquefied gas and liquid with standard boiling point equal to or lower than 60 ℃.
Special equipment refers to boilers, pressure vessels (including gas cylinders), pressure pipes, elevators, lifting machinery, passenger ropeways, large amusement facilities, and special motor vehicles in the field (factory) that are more dangerous to personal and property safety.
"Special equipment catalog" is defined as: pressure vessel, refers to the containing gas or liquid, bearing a certain pressure of the closed equipment, the scope is specified as gas with maximum working pressure greater than or equal to 0.1MPa (gauge pressure), liquefied gas and liquid with maximum working temperature greater than or equal to standard boiling point, fixed container and mobile container with volume greater than or equal to 30L and inner diameter (non-circular section refers to the maximum geometric dimension of inner boundary of cross section) greater than or equal to 150mm.
The power saving of scroll air compressor and screw air compressor should be combined with load rate, running time and maintenance cost. The following is a detailed comparative analysis: 1. technology principle and efficiency characteristics 1. Scroll air compressor principle: through the meshing movement of two scrolls, the air is realized.
The power of the 6 cubic air compressor is not fixed, it will vary according to the specific design and application requirements. In general, the power of the 6 cubic air compressor may be around 37 kW, which is a common power specification provided by many manufacturers. However, it is also possible
Comparative Analysis of Permanent Magnet Variable Frequency Air Compressor and Granklin Water Lubricated Single Screw Air Compressor In the field of industrial compressed air equipment, permanent magnet variable frequency air compressor and Granklin water lubricated single screw air compressor occupy an important position with their unique technical advantages. The following from the original work
Whether the screw air compressor pump head needs to be refueled depends on the specific air compressor type and the manufacturer's recommendations. For most screw air compressors, the pump head (I. e. compressor head) needs to be filled with lubricating oil. This is because when the screw air compressor is working, the inside of the compressor head
The air pressure used in general machining centers usually needs to meet certain standards and ranges to ensure the normal operation and processing efficiency of the machining center. Specifically: pressure range: machining center in the process of air pressure range is generally 0.4~0.
In the field of air compressors, "ppm" is an abbreviation of "parts per million", meaning "one part per million". When talking about the residual oil content of air compressor, ppm is used to quantify the oil content in compressed air.
In the incineration power plant, the air compressor, as the core auxiliary equipment, mainly undertakes the five major functions of instrument control gas supply, material transportation power, safety guarantee support, equipment drive and maintenance, air treatment and purification. The specific functions are as follows: 1. instrument control gas supply: ensure the system
Whether the compressed air storage tank belongs to special equipment depends mainly on its volume and pressure and other parameters. Generally speaking, all kinds of pressure vessels with volume greater than or equal to 30L and pressure greater than or equal to 0.1MPa (gauge pressure, the same below), including liquefied gas and maximum working
In the medical field, compressed air, as an important auxiliary tool, plays an irreplaceable role. It is not only directly related to the normal operation of medical equipment, but also has a profound impact on the treatment effect and life safety of patients. Produced by Shanghai Granklin Group
Air Compressor Safety Hazards and Preventive Measures 1. Air Compressor Safety Hazards Mechanical Injury When the air compressor is running or overhauling, the limbs may contact the rotating parts of the equipment, such as couplings, belts, etc., causing mechanical injuries such as pinching and strangulation. Compressed air pipes, valves
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
