Granklin Air Compressor Technical Articles & Application References

Technical Articles

Technical Articles

Compressed Air System Technology & Application References

Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.

Technical Articles List

  • Can the air compressor be placed on the second floor? What problems need to be confirmed before installation

    The air compressor can be installed on the second floor, and this arrangement is also available in actual projects. Can not install, mainly depends on the conditions of the plant itself. There is a vacant room on the second floor, which is of sufficient size, which does not directly indicate that it is suitable for air compressor room. After the equipment is put in, it will have to run for a long time, dissipate heat in summer, drain water at ordinary times, and maintain and disassemble it later. The floor, run, and surrounding rooms are also affected.

    View Details

  • Common Problems and Solutions in Semiconductor Compressed Air Treatment

    The core of semiconductor compressed air treatment is three things: to oil, to water, to dust. The water-lubricated air compressor solves the problem of oil from the source of compression. At the same time, because it does not produce sludge and metal debris, it also indirectly reduces the risk of particle pollution, making the entire purification chain easier and more reliable. As long as the equipment is selected, the pipeline is well done, and the maintenance is kept up, the compressed air can honestly meet the demanding requirements of semiconductor production.

    View Details

  • What is the function of the air compressor of the waste incineration device

    Air compressors do "invisible but inseparable" work in waste incineration devices. They are needed everywhere, from combustion support to ash removal, from opening and closing doors to flue gas purification. The addition of the water-lubricated air compressor makes this system cleaner and more environmentally friendly while providing power, which coincides with the goal of pursuing green treatment in the waste incineration plant itself.

    View Details

  • Do compressed air pipes need insulation?

    The pipe is afraid of cold, the air is afraid of humidity, and the air compressor is lubricated with water. When these are put together, heat preservation is very meaningful. Conversely, if the pipeline is short, the environment is warm, and the air itself is not too wet, the problem of non-insulation is not big. It is good to make flexible decisions according to the actual situation, don't cut across the line.

    View Details

  • Before or after the air storage tank

    The water-lubricated air compressor presses the air out, first sends it to the air storage tank for storage, stabilizes and stabilizes, then takes away the water through the cold dryer, and finally sends the clean air to various places where the air is used. In this way, the equipment is durable and the gas is at ease.

    View Details

  • Air compressor multi-tank parallel use

    Industry production, construction sites and other gas points, gas fluctuations in the scene. The original single gas storage tank volume is insufficient, do not want to stop production to replace the expansion and transformation of the large tank scene. Production conditions that require high continuity of gas supply and require redundant backup.

    View Details

  • After the explosion-proof air compressor is selected, does the cabinet need explosion-proof treatment?

    The operating characteristics of the water-lubricated air compressor itself make it unnecessary to frequently maintain the relevant parts of the oil circuit, and the whole system has fewer impurities. When used with the explosion-proof cabinet, it will not add additional maintenance burden to the explosion-proof structure. Only the sealing and explosion-proof state of the cabinet need to be checked regularly, the safe operation of the whole system can be maintained for a long time, while retaining the energy-saving advantages of the water-lubricated air compressor itself.

    View Details

  • Does oil-free air compressor need frequency conversion

    The water-lubricated oil-free air compressor itself uses water for lubrication, cooling and sealing, the compression process is closer to the ideal compression state, and its energy efficiency is higher than that of other oil-free models. After matching with frequency conversion technology, the energy-saving advantage can be further enlarged under the working condition of gas fluctuation, frequent loading and unloading are not required, additional energy consumption loss is also reduced, and the overall operation cost will be lower.

    View Details

  • The role of air compressor cold dryer

    The cold dryer relies on refrigeration technology to cool the high-temperature compressed air, so that the original gaseous water vapor becomes liquid water droplets, and then the liquid water is collected by the separation device and discharged from the system, and finally the dry compressed air is output.

    View Details

  • How does the specific power of air compressor affect the energy consumption of equipment

    The water-lubricated air compressor does not need additional lubricating oil to participate in compression because it is lubricated with water, thus reducing the energy consumption loss caused by lubricating oil from the source. On the premise of the same gas production, it is easier to achieve lower specific power and greater overall energy saving potential. In addition, it does not need frequent replacement of lubricating oil-related consumables, avoids the increase in specific power caused by blockage of consumables, and can maintain a stable low energy consumption state for a long time.

    View Details