2026-04-09Views:
With the rapid development of industry, the social requirements for the required goods have been greatly improved;
at the same time, the improvement of the precision of pneumatic components has prompted higher and higher requirements for oil and water content of compressed gas. In the past, new products of oil-free air compressors have greatly restricted their widespread use due to quality problems.
With the improvement of the quality of the oil-free air compressor, its quality has been fundamentally improved, which can fully meet the needs of modern industrial production, and the superiority of the oil-free air compressor in the use process can be reflected;
specific performance is as follows:
1. Because of the high viscosity of lubricating oil, the current oil removal equipment can not be completely removed, so that the oil-free air compressor compressed gas does not contain oil is irreplaceable.
2. At present, water removal equipment such as refrigerated dryers, non-heat regenerative dryers, and micro-heat regenerative dryers lose their water removal function due to the oil in the compressed air;
the clean oil-free gas compressed by the oil-free compressor fully protects the water removal equipment and reduces the additional capital occupied by the maintenance of the water removal equipment.
3. The use of oil-free air compressor to provide external compressed gas, not due to the pressure loss caused by oil removal equipment and greatly reduce the motor load, to achieve energy saving effect;
at present, the three-stage oil remover with good quality will produce a pressure loss of 1 to 1.2kg during use. A 7.5KW air compressor will pay an extra 600W of power loss for every 1kg of pressure increase, and 6 degrees of electricity for every working day (10 hours, for example), which will be a long-term invisible expense.
4. The use of oil air compressor greatly wastes lubricating oil. Taking a 7.5KW high-quality oil air compressor as an example, it consumes 5kg of lubricating oil every month;
at the same time, in order to remove the oil in the compressed gas, it is necessary to use an efficient oil filter and replace the filter core many times, which is also a great expense.
Air compressors without oil and water lubrication are not lubricated with lubricating oil, so they are especially environmentally friendly and will not cause pollution to the environment. In addition, under the general environment of national policies, the government, on the one hand, advocates energy conservation and emission reduction through incentives such as incentives and subsidies, encouraging users to reduce energy consumption and promote low carbon emissions. On the other hand, from time to time, the standards are improved and the manufacturing enterprises fully implement the industry quality standards. The corresponding testing methods and instruments are more accurate. Therefore, the oil-containing screw air compressor not only cannot meet the gas demand of high-end users, but also cannot pass the national EIA standard.
The water-lubricated oil-free air compressor is widely used in aerospace, chemical industry, textile, electronics, medicine, food, bottle blowing and capping, laboratory and other high-end industries and special process requirements. The main structure of the water-lubricated oil-free screw air compressor adopts single screw all stainless steel, the smooth medium adopts pure water conforming to drinking water standard, and is equipped with high-performance stainless steel components. The whole compression system has no smooth oil component and has become the new favorite in the market!
Compared with the oil air compressor, the water lubricated oil-free screw air compressor completes low temperature contraction, low speed operation, simple structure and convenient maintenance, so the maintenance cost is greatly reduced. However, due to congenital defects such as smooth oil and smooth operation, the oil-bearing air compressor has complicated structural design and complicated maintenance, thus the operating cost is much higher than that of water-lubricated oil-free air compressor. Obviously, the advantages of water-lubricated oil-free air compressors are extremely obvious.
The screw air compressor can be operated for 24 hours. The air pressure is not enough to load automatically, the air pressure is enough to unload automatically, and the idle time exceeds the rated time to stop automatically, thus realizing unattended for 24 hours. Air compressor can insist on continuous work.
Air compressor (air compressor) as a general machinery, in various fields of the national economy has a wide range of applications. Its core function is to convert mechanical energy into gas pressure energy to provide power source or control medium for equipment. The following are the main application areas and industry distribution: 1. core applications
When starting the air compression system, it is usually recommended to turn on the air compressor first, and then turn on the dryer. This is because the air compressor is the source of compressed air, and only by starting the air compressor first can compressed air be generated for the dryer to process. If you turn on the dryer first, and not
What is the rated power of a 30 cubic meter air compressor? The rated power of an air compressor is related to its exhaust volume (in cubic meters per minute) and the required working pressure. 30 cubic meters means that the displacement of the air compressor is 30 cubic meters per minute. However, to be sure
First of all, we must understand that the "kilogram" in the expression "compressed air pressure 5kg" actually refers to "kilogram force/square centimeter", which is a commonly used pressure unit and can also be written as "kgf/cm &
Screw air compressors are fixed assets. Fixed assets refer to non-monetary assets held by an enterprise for the production of products, provision of services, rental or management, which have been used for more than 12 months and whose value reaches a certain standard, including houses, buildings,
Scroll compressors and screw compressors have their own advantages and disadvantages, and the choice of which is better depends on the specific application needs and scenarios. Scroll compressor: Advantages: compact structure, stable operation, low noise, high energy efficiency, and can still maintain a relatively high level of partial load
Nitrogen is widely used in the semiconductor manufacturing process, mainly based on its unique physical and chemical properties and its irreplaceable role in many key process links. The specific reasons are as follows: 1. Chemical inertness: the core barrier for isolating pollution Nitrogen molecules are composed of two nitrogen atoms through three
Air compressor (air compressor for short) is a kind of equipment for compressing gas. It is a device that converts the mechanical energy of the driving force (usually an electric motor or diesel engine) into gas pressure energy. It is a pressure generating device for compressed air and the core equipment of the pneumatic system.
In industrial production, the size of gas production varies depending on the industry, production process, equipment size and other factors. To judge whether the gas production is large, we need to refer to the standards of specific industries and the actual production situation. The following is some reference information and judgment basis: industry
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2