2026-04-09Views：
Safety Management Measures for Air Compressor
1, the air compressor must have a pressure gauge and safety valve. The pressure gauge must be calibrated regularly. The safety valve and pressure regulator must act reliably, and the operating pressure of the safety valve shall not exceed 1.1 times of the rated pressure. Oil-lubricated air compressors must be equipped with oil-cut protection devices or oil-cut signal display devices. Water-cooled air compressors must be equipped with water-cut protection devices or water-cut signal display devices.
2. The exhaust temperature of the air compressor shall not exceed 190 ℃ for single cylinder and 160 ℃ for double cylinder. A temperature protection device must be installed to automatically cut off the power supply when the temperature is over.
Air compressor suction port must be equipped with filter device.
The air compressor must use compressor oil with a flash point of not less than 215°C.
3. The air bag of the air compressor should be set in a cool place outdoors on the ground and in a place with smooth air underground. In the underground, the fixed compressor and the air bag should be set in 2 chambers respectively. The temperature in the air bag should be kept below 120 ℃, and equipped with over-temperature protection device, which can automatically cut off the power supply and alarm when over-temperature.
The size of the air pressure of the factory air compressor is generally determined according to the specific application scenario and demand. Usually, the air pressure range of the factory air compressor is between 0.6 and 1.0MPa, and it is also said that the working pressure of the industrial air compressor is generally around 7 to 10bar. The following are some
The ratio of the electric energy consumed by the air compressor into compressed air is not a fixed value, but is affected by many factors, including the design of the air compressor, the quality of manufacture, the operating state and the efficiency of the use of compressed air. Generally speaking, the electric energy of the air compressor is converted into pressure
Oil-free air compressor operation principle and Shanghai granklin group air compressor product introduction with the process of industrialization, air compressor has become an indispensable equipment in many industries. In the air compressor market, oil-free air compressors have attracted much attention due to their unique advantages.
The screw air compressor cooler plays a vital role in the screw air compressor system. Its main functions can be summarized as follows: 1. to dissipate the heat generated during the compression process. In the air compression process, the screw air compressor needs to Overcome the cohesion between gas molecules
The machining center shall be equipped with an air compressor. The reason is as follows: the machining center is a highly automated machine tool that can perform a variety of complex machining tasks. In the process of processing, it needs a variety of auxiliary equipment to support its operation, and the air compressor is used as a compressor to provide compressed air.
Air compressor is a kind of important equipment widely used in various industrial production, but it is also a potentially dangerous equipment. Therefore, safe operation procedures and precautions must be observed when operating air compressor to ensure personal safety and equipment Normal operation. Lower
Q: Air compressor oil filter replacement cycle will affect the use of air compressor? A: Air compressor oil filter replacement cycle will directly affect the use of air compressor. If the oil filter is used for more than the recommended replacement period, the oil filter will be blocked, which will cause air pressure.
The oil-free air compressor of Shanghai Granklin Group is really a product characterized by the beauty of technology and the exquisite craftsmanship. This water-lubricated air compressor, with its delicate design and warm performance, presents users with an elegant journey of industrial technology.
The difference between air compressor oil-free and oil injection machine is mainly reflected in the following aspects: 1. working principle Oil-free air compressor: No oil is involved in the compression process. It usually uses special high-temperature materials such as Teflon or molybdenum disulfide to solve the compression process.
The semiconductor air compressor system is one of the important equipment used in the semiconductor production and research and development process, which can provide high-quality and stable gas supply for the semiconductor manufacturing process. At present, the main international standards for semiconductor air pressure systems include the following.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
