2026-04-09Views：
Minor maintenance only needs to replace the air compressor oil and oil filter, which is usually replaced after 500 hours of operation of the new machine. Major maintenance is carried out about 3000 hours of operation of the machine, and the air filter element of the air compressor, oil and gas separator core, motor grease, etc. The air compressor recommends water-lubricated screw air compressors from Grantklin Group.
1. air compressor maintenance:
1. The dirt in the air storage tank shall be removed regularly. At least once every 10 hours of operation, the drain valve at the bottom of the air storage tank shall be opened to allow the air compressor to operate under the pressure of 0.2Mpa for several minutes to discharge sewage under pressure.
The lubricating oil shall be checked twice a day, and the oil level must be kept between the two red lines or red circles of the oil mirror.
The air filter must be cleaned once a month.
4. Check the reliability of the safety valve and the tension of the V-belt once a month.
5. The compressor oil in the crankcase should be replaced regularly, every 800 hours of operation; the oil is used for air compressor oil, 19# in summer and 13# in winter#.
6, the intake and exhaust valve regular cleaning, once a year to remove the valve, remove carbon deposits, a comprehensive maintenance of the host once a year, check the main moving parts of the fit clearance, if the wear is too large should be replaced.
7. The air compressor diaphragm is required to be placed in a dry, clean and well-ventilated place.
2. air compressor use matters needing attention:
1. Check whether all parts of the machine are in normal condition and whether the fasteners are loose before starting up.
2. Check whether the tightness of the belt is appropriate and whether the oil level of the lubricating oil in the crankcase is within the range of 1/3-2/3 of the oil window.
3. Turn the air compressor fan 3-5 turns by hand to check for barrier-free feeling or abnormal noise.
4. Open the gas valve on the gas tank to make it fully open. Press the start button, and the machine will start under no load. About three minutes after starting, if there is no abnormal phenomenon, the gas valve will be slowly closed to gradually increase the pressure in the gas tank.
5. During the operation of the machine, you should always check whether the operation of the machine (such as vibration, sound, temperature, etc.) is normal, whether there is oil leakage, air leakage, loose bolts, etc., and deal with the problems in time. Note: The pressure must be removed first, and then repaired after shutdown. Operation with pressure is strictly prohibited.
The scroll type and screw type in the compressor are two different types of compressor technology, and their working principles and structural characteristics are obviously different. Working principle: Scroll compressor: The working principle of scroll compressor is through the moving scroll and static
The calculation of the air consumption at the end of the air compressor is a process involving multiple factors, which usually needs to be determined according to actual needs and usage scenarios. The following are some commonly used calculation methods and considerations: 1. basic formula Air compressor end gas consumption can be through the following public
Oil-free compression classification Oil-free air compressors are divided according to whether the compressed air contains oil or not, corresponding to oil air compressors or micro-oil air compressors. Oil-free air compressors are distinguished according to different compression forms or different host structures, and several common oil-free air compressors are used.
Permanent magnet variable frequency air compressor does have certain advantages in power saving. The following is a detailed analysis of its power-saving characteristics: High efficiency and energy saving: Permanent magnet variable frequency air compressor combines the advantages of permanent magnet motor and variable frequency control technology, making it possible to operate under different loads.
The "kilogram" mentioned in the air compressor parameters is a popular expression of the pressure unit, which usually refers to the pressure of the compressed air. In the industrial field, 1 "kg" is approximately equal to 0.1 megapascals (MPa), which is used to measure the pressure strength of the output airflow of the air compressor
There is a close relationship between the "kilograms" of the air compressor and the displacement. Here, "kilograms" usually refers to the pressure output capacity of the air compressor, that is, the pressure of the compressed air it can produce, and the displacement is
The air pressure of an industrial gas station is not a fixed value, but is determined according to specific application requirements and equipment specifications. Generally speaking, the pressure range of industrial gas source is quite wide, but the common working pressure range is between 0.6MPa and 1.0MPa (equivalent
In the food industry, the quality requirements of compressed air are very strict to ensure the safety and hygienic quality of food. The following are some common food industry compressed air standards: Water content: The dew point temperature of compressed air must be lower than the dew point temperature of ambient air
Industrial compressed air oil content standards vary according to application fields and industries. The following are industrial compressed air oil content standards based on different standards and specific applications: International Standard ISO 8573: Level 1: Oil content less than 0.01 mg/m & sup3;, Filtration
In the choice of air compressor, centrifugal and screw are two common types. According to the demand of air consumption, the following are some suggestions to help you determine which type of air compressor to choose: 1. The stability and fluctuation of air consumption centrifugal air compressor:
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
