2026-04-09Views：
1. The air compressor oil shall be replaced every 2000 hours or 3 months after operation. Each time it needs to be replaced, first clean the oil in the oil-gas separator, then clean the oil cooler oil, then inching for 3 seconds, stop the machine, clean the oil in the inner cavity of the main engine head, add 2 liters of new oil, then inching for 3 seconds, clean the machine head, and add 5 liters of oil to the main engine head without inching, finally, fill up the oil in the oil separator to the oil mark, then jog the machine for 5 seconds, press the stop button, the oil will drop, and then add oil to the two red lines of the oil level gauge.
2. The oil filter element is replaced with the oil, 2000 hours or 3 months of operation. When replacing, fill up with new oil, and apply a layer of oil on the O-ring, install it, and do not leak oil.
3. Replace the empty filter element when it is blocked, and clean it every 500 hours, with no more than 0.
4Mpa pressure gas purges from the inside to the outside, and then cleans up the dust outside
4. The filter element of the oil and gas separator is usually replaced in 4000 hours or 6 months of operation. When replacing, it must be replaced when the oil is replaced. After replacement, it needs to run for half an hour and then stop, so that the oil core can adapt to the work, wait another hour, and finally run normally,
.
5. Water-cooled cooler, cleaned once every six months, scale and grease should be cleaned with cleaning agent,
6. The oil cut-off valve should be checked regularly. The copper pipe should be removed from the bottom. Use iron wire to top it up. It is better to go up and return it after let go. Otherwise, it needs to be removed and cleaned.
7. The machine needs to be maintained once every summer:
a Remove the oil cooler, soak the oil system with carbon cleaning agent for one day, and then clean it.
B cooling fan blades to clean the surface dust
c motor bearing to add new butter and cleaning motor fan blade surface dust
An oil-free gas compressor is a compressor that does not use lubricating oil in the compression process. Because it does not produce oil pollution in the compression process, it is widely used in industries that require high purity of compressed air. The following are the main oil-free gas compressors
During the normal operation of the air compressor, a certain amount of condensate is usually produced, especially in an environment with high humidity. If the air compressor does not discharge water, it may lead to the following consequences: Internal corrosion: Water accumulates inside the air compressor, which may be related to oxygen in the air
The pressure of air compression pipeline in clean area workshop should be determined comprehensively according to industry specifications, equipment requirements and system efficiency. The following is specific guidance: 1. conventional pressure range Pharmaceutical/electronic industry: The pressure of compressed air pipeline in clean area is usually 5-7 bar (gauge pressure). Food
The fermentation process has very strict requirements for sterile air, which needs to meet the core indicators such as sterility, no dust, no impurities, no water, no oil, positive pressure, etc. At the same time, parameters such as temperature, humidity, cleanliness, flow pressure and so on need to be controlled. The specific requirements are as follows: 1. the core sterile indicators
The durability of oil-free air compressors and oil-free air compressors cannot be generalized, because their durability depends on many factors, including design, manufacturing process, material selection, use environment and maintenance. Oil air compressor usually uses lubricating oil
Oil-free air compressor can output pure and pollution-free compressed air because it does not need lubricating oil to participate in the compression process, and is widely used in fields with strict requirements on gas cleanliness. Its core use is reflected in the following scenarios: medical and pharmaceutical industry: for surgical instrument cleaning, pharmaceutical production.
The air storage tank is a pressure vessel. The following is a detailed explanation of this conclusion: Definition and nature: Pressure vessel refers to a closed device that contains gas or liquid and carries a certain pressure. Air storage tanks are tank-like storage equipment for storing air, and
Industrial air compressors are widely used in many fields. The following are some of the main uses: Mechanical manufacturing: In the mechanical manufacturing process, pneumatic tools such as pneumatic wrenches and pneumatic screwdrivers need compressed air to drive. air compressor for these tools
Oil-free air compressor and oil-free air compressor: which is better? In the air compressor market, oil-free air compressor and oil-free air compressor are two common types. They have their own characteristics and are suitable for different application scenarios. So, what kind of air compressor is better? This needs root
Scroll and screw air compressors: Which is more advanced? In air compressor technology, scroll and screw are two common and efficient technologies. But they have their own advantages, and their "advanced nature" depends on the specific application scenarios and needs.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
