2026-04-09Views：
According to many years of experience, in order to screw air compressor efficient and stable operation, must do its daily maintenance work. On the maintenance of the unit to "two hot". First of all, enterprises should be hot, attach great importance to the timeliness of maintenance, and see that maintenance is the key to the efficient operation of equipment. If not on time maintenance equipment failure delay enterprise production, enterprise which benefit? The following summarizes the general content of air compressor maintenance, for reference only.
Air compressor maintenance is mainly divided into air filter, oil filter, oil, oil separator and other accessories maintenance and replacement. Details are as follows:
1. Air filter maintenance
air filter is a component for filtering air pollutants. Air pollutants vary in size. Some of them will be filtered out when filtering, while others cannot be filtered out directly due to their too small diameter, thus reducing the operating efficiency of the unit and accelerating bearing wear. Secondly, the air filter is prone to blockage and damage during long-term use, so it needs to be cleaned or replaced in time. It is usually recommended that the unit be replaced every 1500-2000h.
2. Oil filter
the new machine is replaced every 500h after operation, and then the screw air compressor needs to be replaced every 1500h-1800h.
3. Oil and gas separator
the service life of the oil and gas separator is usually about 3000h, of course, the specific needs depend on the use. Secondly, it is necessary to pay attention to the excessive differential pressure and need to be replaced.
4. Oil replacement
oil plays an important role in the operation of the air compressor. The new machine needs to change the oil once after 500h and then every 2000h. When changing the oil, it should be noted that the old oil must be discharged clean before adding lubricating oil to prevent the mixing of old and new oil from affecting the performance of lubricating oil.
Screw air compressor operation is inseparable from the daily maintenance, here I want to emphasize a problem is that we must fully understand the importance of air compressor maintenance.
The air volume calculation of air compressor shall comprehensively consider rated parameters, actual working conditions, operation modes and loss factors. The following are detailed steps and key points: 1. core parameters and unit rated air volume: free air volume marked by manufacturer (FAD, Free AI
The main reason why semiconductors require oil-free compressed gas is that any grease can contaminate the chip, which in turn affects the performance and reliability of the product. In the semiconductor chip manufacturing process, oil-free compressed air is required to ensure the cleanliness of the production environment
When the water vapor of the air compressor is more, it can be solved from the following aspects: 1. check and maintain the installation of the drainage system and regularly check the drain valve: install the drain valve at the bottom of the air tank of the air compressor to ensure that the condensate can be smoothly discharged. Periodic inspection
Oil-free air compressor common fault maintenance: 1, oil-free air compressor intermittent work, insufficient gas supply. The reason for this failure is: insufficient voltage. Starting from the buzzing sound, if the current running current is greater than 5: 00 a.m. (ordinary 520 watts and 840 watts without oil or oil
The lubrication principle of oil-free water screw compressor shows that Granklin water lubricated single screw air compressor uses water as the core lubricating medium, and realizes efficient compression through the precise coordination of single screw and star wheel. During operation, water naturally covers the surface of key moving parts
I believe that many customers who buy oil-free air compressors or micro-oil air compressors are not very clear. In fact, this question cannot be answered positively. In fact, both air compressors have advantages.
According to whether the air compressor needs the participation of lubricating oil at work, we divide it into two types: oil-free air compressor and oil-free air compressor. Therefore, many small partners have asked whether it is better to have an oil air compressor or an oil-free air compressor. Today
The moisture content in the air is not a fixed value, but is affected by many factors such as temperature, humidity, geographical location and climatic conditions. Therefore, it is not possible to give a definite ppm (parts per million) value to express the moisture content of the air.
The two air compressors themselves cannot realize the concept of "unlimited endurance", because any mechanical equipment has its operating life and the characteristics of maintenance. But if the ability to work from a continuous point of view, two air compressors can be reasonable
The pressure increase of air compressor will have multi-dimensional impact, which needs professional evaluation from four aspects of equipment operation, energy consumption efficiency, system stability and safety compliance: 1. equipment operation level mechanical load intensifies: pressure increase will directly increase screw rotor and shaft
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
