2026-04-10Views：
When we are ready to start the air compression system, we always wonder whether we should let the cold dryer wake up gently or activate the air compressor first. In fact, it is like preparing a perfect iced drink. We always need to prepare ice cubes first and then pour it into the drink, right?
Similarly, in this small world of compressed air, the air compressor is like the base of the drink, which provides us with a stable and strong airflow. The cold dryer, like the ice cube, its task is to gently remove the moisture and heat in the air flow, so that the air flow is more pure and refreshing.
Therefore, when starting the system, we should first let the air compressor start working and let it provide us with airflow stably. When the air compressor runs smoothly and the air flow is stable, we gently start the cold dryer to make the pure air flow more pure and dry through the "ice cooling" treatment of the cold dryer.
In this way, our compressed air system can serve us in the best condition! Remember, first the air compressor, then the cold dryer, make our system more perfect and efficient!
The amount of air supplied by a compressor is conceptually closely related to its output, but strictly speaking, they are not identical. Air supply usually refers to the volume or flow of compressed air that the compressor can provide per unit of time, which is a measure of compressor performance.
Air compressor is oil or oil-free, which one is better depends on the specific application scenarios and needs. The following is a comparison of oil-free air compressors: Oil-free air compressors Advantages: Relatively low prices: Oil-free air compressors are usually more expensive than oil-free air compressors
The oil content of the 1. is different. 1. Oil and no oil in the air compressor generally refer to the oil content of the gas discharged from the exhaust port of the air compressor. Generally, the oil content of the oil machine is larger. 2. The oil content of the oil-free machine is 0.01ppm, so use this oil content
Technical description on the application of nitrogen in electroplating process In electroplating production, nitrogen, as an auxiliary process gas, plays an important role in the field of precision electroplating by improving the electroplating environment, optimizing the performance of the solution and improving the quality of the coating. The following from the technical principle, line
On the site, multiple units or types of work may use air compressors, depending on the specific needs of the site and the type of work. Generally speaking, the following units or types of work may use air compressor: construction unit: construction unit is carrying out concrete spraying
Generally good air compressor air filter can be used for 1500-2000 hours and must be replaced after expiration. However, if your air compressor room environment is dirty, a better air compressor filter element will be replaced in 4 to 6 months. If the air compressor air filter
Ppm is the concentration unit of one part per million, which is used to indicate how much oil is left in the compressed air. The smaller the number, the cleaner the air. The water lubricated air compressor and the high efficiency filter can push this value to a very low level.
The purity of compressed air can usually reach between 99.2 and 99.99 percent, depending on the type of air compressor, subsequent purification measures and the application scenario. The following are the key factors affecting the purity of compressed air and specific instructions: 1. core factors
The downstream industry's requirements for compressed air cleanliness and the trend of oil-free air compressors can be summarized as follows: 1. compressed air cleanliness requirements The downstream industry has strict requirements for compressed air cleanliness, which mainly depends on the industry
There are significant differences between water-lubricated air compressors and dry oil-free air compressors in many aspects: Lubrication method: Water-lubricated air compressors use water as a lubricant, thanks to the specially designed head, which can mix water and air Mixing to achieve the dual functions of lubrication and compression
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
