2026-04-10Views：
There are two main methods for adjusting the pressure of the air compressor, which correspond to two different pressure control methods of the air compressor:
for spring-returnable air compressors, there is usually a rotatable valve on the top. Turn this valve up to increase the pressure, and turn down to reduce the pressure. At the same time, the safety valve can also be on the screw to the down tight, but the adjustment needs to be careful, slowly adjust, and do not recommend non-professionals to operate, because the safety valve pressure adjustment risk is relatively large.
Most of the current air compressors are equipped with pressure sensors or pressure switches to achieve automatic control. Adjusting the pressure of this air compressor can be achieved by rotating the pressure adjustment screw clockwise or counterclockwise. Turn the pressure adjustment screw clockwise, the closing and opening pressure will increase at the same time, and counterclockwise, the closing and opening pressure will decrease at the same time. In addition, there is a differential pressure adjustment screw. If you rotate it clockwise, the closing pressure will remain unchanged and the disconnection pressure will increase; if you rotate counterclockwise, the disconnection pressure will decrease.
Please note that when adjusting the pressure, be sure to keep the consistency of the screw debugging button to prevent equipment damage caused by inconsistency. At the same time, any adjustment of the air compressor is recommended under the guidance of professionals to ensure safety and the normal operation of the equipment.
The normal negative pressure value of the air inlet of the air compressor should generally be between 0.5 and 0.7bar. This range can ensure the normal operation of the air compressor and avoid overheating or overpressure. At the same time, the limit value of the suction negative pressure of the air compressor is about-50kPa (I .e. -0.5bar), but the actual
The continuous working time of oil-free air compressor is a very interesting topic! Although it is called "oil-free", it does not mean that it can work endlessly! In fact, the continuous working time of the oil-free air compressor will be affected by many factors.
The application of compressed air in the fermentation industry is very extensive and important, mainly reflected in the following aspects: Power drive: The production process of the fermentation industry requires a steam turbine to drive the air compressor to provide the compressed air required for the fermentation equipment. So
Air compressor integrated inverter and split inverter have their own advantages and disadvantages, which is better depends on the specific application scenarios and needs. The following is a comparative analysis of the two: the advantages of integrated frequency converter: high integration: integrated frequency converter will be air pressure
Q: What is the general air pressure of the factory air compressor? A: 0.8Mpa, also known as 8kg pressure. In general, before the air compressor leaves the factory, the air pressure of the air compressor is adjustable and is not fixed at a certain value, depending on the user's needs. The unit of air pressure is & l
The water in the air compressor needs to be released. The following is a detailed explanation: The source and influence of the water in the 1. air compressor: During the working process of the air compressor, because the air contains water vapor, when the air is compressed, the water vapor will condense into liquid water and accumulate inside the air compressor
Dry-type oil-free machine will not have oil, because its design principle and working process do not need to use lubricating oil. Dry-type oil-free machines usually use special materials and structural design to ensure that no lubricating oil is needed to reduce the temperature during the compression process
Color steel plate production does need to use the air compressor. Air compressor plays an important role in the production of color steel plate, mainly used to provide compressed air, which is used in many production links. Specifically, the role of air compressor in the production of color steel plate may
The air compressor can theoretically run continuously for a long time, but the following points need to be paid attention to: Maintenance: The air compressor needs regular maintenance and maintenance to ensure its normal, safe and efficient operation. These maintenance include cleaning, replacing the filter element, changing the oil, checking
In the electroplating factory, the air compressor has a wide range of applications. Electroplating is a process that uses the principle of electrolysis to plate a thin layer of other metals or alloys on the surface of certain metals, and the air compressor plays a key role in this process, mainly providing compressed air. Electroplating
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
