Air compressor for laser cutting machine

As far as today's profile processing market is concerned, laser cutting, water cutting and other technologies have unparalleled advantages in a certain range.

Fast processing speed, less waste of raw materials, low processing costs, the ability to process complex graphics, and so on, these advantages are beyond the reach of traditional blanking and milling.

However, as an important supporting equipment, "air compressor" how to better apply to laser cutting machine has been the problem of many users.

Application of air compressor in laser cutting machine

first of all, what are the main factors that affect the cutting accuracy and surface quality when we analyze the laser cutting workpiece?

1. Compressed air quality

2. Workpiece material quality

3, Laser cutting equipment performance and quality

the quality of the profile used in the processing of the workpiece is poor, there are defects such as cracks, sand, pores, etc., which is bound to greatly increase the scrap rate of the final molding parts, and the quality of the laser cutting equipment will also increase the scrap rate and affect the stability of the overall production.

Secondly, let's list the laser cutting protective gas:

1. Nitrogen

nitrogen is an inert gas, can be very good to protect the laser cutting surface, but because of its isolation of oxygen, so the processing efficiency is reduced, the cost of nitrogen is relatively high, so unless the processing of precious metals or processing requirements are very high, generally rarely choose bottled nitrogen as an auxiliary gas for conventional processing.

2-Oxygen

it can support combustion, but due to the strong oxidation of high purity oxygen, the cutting surface will be black and the hardness will increase, which is commonly known as "coke". Therefore, the ratio of oxygen to nitrogen is about "37" air, which has become the only choice for laser cutting in ordinary processing.

3. Compressed air

as an essential protective gas source, compressed air technology has begun to be concerned by many supporting manufacturers and users. Granklin air compressor has more choices for users with its excellent performance and high cost performance.

Because compressed air mainly acts on the lens of the laser cutting machine head, if it contains oil or water, it will inevitably pollute the lens, seriously reflect the laser, and cause the quasi-value mirror, focusing mirror and laser head to burn out. Therefore, the quality of compressed air is also an important factor affecting the quality of laser cutting final forming parts.

Finally, let's take a look at the current situation of the domestic market:

because the displacement of the compressed air required for laser cutting is not high, the majority of small screw air compressors or piston machines are generally used, but the quality of compressed air is very high. The ideal state of compressed air can guarantee at least six hours. There is no need to clean and protect the lens.

At present, compressors on the market are mixed with good and evil people. Compressors with poor quality and compressed air produced by post-processing are bound to have incomplete water and oil removal, and even some piston machines will have solid particulate matter, which will have adverse effects on lenses.

Granklin Air Compressor is specially equipped with a complete set of compressed air solutions for laser cutting equipment, covering almost all the required equipment for compressed air processes such as air compressors, air storage tanks, cold dryers, precision filters at all levels, energy-saving pipelines, etc. It truly realizes one-stop procurement and can meet the needs of various customers.

Choose De granklin air compressor as a laser cutting machine supporting the four reasons:

1, in the field of laser cutting supporting relatively early, so the process with the air compressor design, selection is also targeted.

2. High-quality models such as dry oil-free air compressors and water-lubricated oil-free screw air compressors have all obtained ISO CLASS 0 oil-free certificates. The high-precision filter can finally reach an oil content below 0.003ppm, which greatly prolongs the cleaning period of the lens of the laser cutting machine.

3. The high-performance GHH original imported screw host ensures the stable operation of the air compressor; our uniquely designed air compressor is smaller in size and covers a smaller area.

4, the main, or granklin air compressor has been the pursuit of high energy efficiency and low energy consumption of the whole machine performance, many models are better than the national level of energy efficiency.

For how to choose the air compressor equipment suitable for you, please contact us, granklin air compressor sales telephone number: 13918023456 contact person: Mr. Hu.