2026-04-10Views：
Oil-free screw air compressor is not really oil-free, but its oil content is very low, can reach 0.01ppm or less. This kind of air compressor uses special coating or material to reduce or eliminate the parts that need lubricating oil, so that oil pollution is not generated during the compression process. Due to the extremely low oil content in the outlet air, this air compressor is widely used in occasions that require high quality of compressed air, such as biology, medicine, electronics, food, medical and chemical fields.
It should be noted that although the oil content at the outlet of the oil-free screw air compressor is very low, in actual use, it is still necessary to configure a reliable post-treatment degreasing and purification equipment at the back end to ensure that the purity of the compressed air meets the requirements. In addition, the maintenance and maintenance of the oil-free screw air compressor is also very important. Regular inspection and replacement of parts are required to ensure its long-term stable operation and the quality of compressed air.
The water supply of the water-lubricated air compressor is controlled by the system. The water vapor cylinder will replace the pure water many times to replace the water in the head of the water-lubricated air compressor. Water replenishment is not performed at one time. Without affecting the work of the water-lubricated air compressor head, the lubrication water can be replaced many times to achieve the purpose of automatic water replenishment.
When selecting an air compressor, an oil-free air compressor and an oil-free air compressor have their own characteristics and applicable scenarios. The specific choice of which type of air compressor needs to be considered according to your actual needs, application scenarios, cost budgets and other factors. with oil air compressor
In safe production, air compressor as the main hidden equipment, its potential risk points mainly include the following aspects: high temperature and high pressure risk: air compressor will produce high temperature and high pressure when working. If the equipment is not maintained properly or the operation is wrong, the equipment may be over
Many problems of air compressor water can be solved from many aspects. The following are some specific solutions: Adjust the ambient temperature: Ensure that the temperature in the air compressor room is appropriate to avoid freezing the drain valve due to low air temperature. If possible, you can increase the room
The frequency of screw air compressor discharge (I. e. discharge of condensed water) should be determined according to the specific working conditions and the use of compressed air. The following are some strict considerations and suggestions: 1. working conditions Ambient temperature and humidity: When the ambient temperature is high or the humidity is high, the air
When two identical air compressors are connected in series, whether the pressure will increase is not a simple "yes" or "no" problem. This involves a number of factors, including the performance of the air compressor, the design of the piping and whether it is equipped with a pressure regulator.
The working pressure range of low-pressure air compressors is generally 0.2-1.0MPa(2-10bar), and the specific pressure depends on the application scenario and equipment design. The following is a detailed description: 1. pressure range analysis standard definition: low pressure air compressor refers to exhaust pressure ≤ 0.5MPa, but actual
The carbon deposition cleaning cycle of the screw air compressor is not static, but is affected by many factors, including the use environment of the air compressor, the operating time, the load condition and the maintenance strategy. Therefore, an exact cleaning time interval cannot be given. General
The quality level of compressed air is an important consideration, which ensures the safety and efficiency of compressed air in various applications. The following is a detailed description of the standard: the quality level of compressed air is mainly based on its purity and the type of impurities contained.
The core application scenario analysis of compressed air in lithium battery production In the field of lithium battery manufacturing, compressed air, as a key auxiliary medium, runs through the core process links such as electrode preparation, cell assembly, packaging and testing and packaging, which is important for ensuring product quality and improving production.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
