Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
As an important form of energy generation, air compressor is widely used in various industries, and there are many details in its maintenance. Do a good job of maintenance, in order to extend the service life of the air compressor. In this regard, we put forward a few suggestions: 1, should be
The textile industry's requirements for compressed air are not only the oil content in the air, but also water and impurities. However, in these three items, the oil is more difficult to completely filter, so the quality of the gas used can be said to determine the grade of a textile enterprise. So
1. Oil level in oil and gas separator. If the oil level of the air compressor is too low, add lubricating oil. Stop the machine when refueling. Loosen the refueling plug to refuel after depressing the pressure. 2. The integrity of the hose, whether there is leakage. 3. All electrical connectors shall be stable and in good condition.
1. Before the air compressor runs every day or every time: (1) drain the oil and gas barrel; (2) check the oil level; (3) prepare peripheral equipment, such as water and electricity, open the compressor outlet valve, etc. 2. The air compressor runs for 500 hours: (1) Remove and clean the air filter element,
Due to the large and small parts of the air compressor, the common ones are: air filter, oil filter, oil core, lubricating oil, belt, solenoid valve, etc.; air compressor maintenance is divided into: overhaul and minor repair. Under normal circumstances, the overhaul of air compressors is basically a serious problem.
This depends on your request! If you require a high degree of oil-free cleanliness, buy an oil-free screw machine; if you can accept micro-oil, you can buy an ordinary screw machine with a freeze dryer, an adsorption dryer, and a 4-level precision filter. If the food industry is not directly
Basic parameters are required: 1. Pressure size (generally expressed in units such as MPA or BAR or kilograms) is determined according to the size of the aerodynamic force you need. 2. Exhaust volume, (M & sup3 is used for general standards;/MIN as a unit) The displacement is the same as the amount of gas you need.
Many people think that oil-free air compressors are truly oil-free, but this is not the case. Usually we think that the oil content of the oil-free air compressor is 0.01ppm, while the oil content of the screw machine we usually use is about 3ppm, which we will recognize above this standard.
The air compressor, also known as the air compressor, is the core equipment in the pneumatic system. It provides air source power. It converts the mechanical energy of the electric motor or diesel engine into the pressure energy of the gas. It is a pressure generating device for compressed air. The principle of air compressor is easy to understand
Oil-free air compressor has been widely used in many industries in the industry. The maintenance and maintenance of oil-free air compressor are also concerned by users. Air compressor maintenance and air compressor maintenance are one of the daily work of users. correct routine maintenance and make
