2026-04-09Views：
Oil-free air compressor has been widely used in many industries in the industry. The maintenance and maintenance of oil-free air compressor are also concerned by users. Air compressor maintenance and air compressor maintenance are one of the daily work of users.
Correct daily maintenance and use can extend the service life of the oil-free air compressor and avoid or reduce the occurrence of failures.
Oil-free air compressor has the characteristics of energy saving, environmental protection, stability and durability.
Accurate use environment: The normal use environment of the air compressor is 5 ℃ -40 ℃, and must not be placed in an unobstructed place, do not work in a humid and dark place, and be strict in storing flammable and explosive liquids and gases. Work in places with dusty and volatile gases. Keep the environment tidy and avoid unnecessary accidents. Discharge the sewage in the gas tank in time, and it is recommended that it should be discharged at least once a week.
The filter should be cleaned in time according to the use situation, check the accessories and cables on schedule, and replace them immediately if damaged. The machine should be kept clean and dry so that it can fully display its functions. When the air compressor is not in use, the air in the air storage tank should be released and the sewage in the air storage tank should be discharged and stored in a dry environment.
Pay attention to the power supply voltage and air compressor nameplate identification. When the power supply voltage is higher than the combined voltage of the air compressor, it may cause personal accident and damage the air compressor. When the power supply voltage is lower than the combined voltage of the air compressor, it will cause poor starting and even damage the motor.
Be sure to operate within the pressure range set at the factory (generally the factory maximum pressure is set to 8Bar), otherwise there will be a danger of explosion of the gas storage tank. (Need special pressure, please contact the manufacturer).
When not in use, develop the habit of turning off the power in time. When moving the air compressor or connecting other equipment, it is necessary to turn off the power. Work in strict accordance with the calibrated voltage, frequency and rated load on the air compressor, the effect will be better and safer.
Oil-free air compressor itself does not contain any oily substances, do not add any lubricating oil and oily substances.
First of all, we must understand that the "kilogram" in the expression "compressed air pressure 5kg" actually refers to "kilogram force/square centimeter", which is a commonly used pressure unit and can also be written as "kgf/cm &
Ppm is the concentration unit of one part per million, which is used to indicate how much oil is left in the compressed air. The smaller the number, the cleaner the air. The water lubricated air compressor and the high efficiency filter can push this value to a very low level.
The pressure of the air compressor usually varies according to its type, specification and usage scenario. The following is a summary of the pressure range of different types of air compressors: 1. common air compressor pressure range low pressure air compressor: the working pressure of this type of air compressor
To make the gas of the air compressor anhydrous, the following measures can be taken: Cold and heat exchange technology: Pre-cooling treatment of the hot compressed air just produced, which helps to reduce the moisture content in the air. Install the drain valve: install the drain valve at the bottom of the air tank of the air compressor
The service life of air compressor is a complex problem, which is affected by many factors. Generally speaking, the life of the air compressor is about 10 to 15 years, but the specific life may vary due to factors such as equipment quality, operating environment, and maintenance. The following is a pair
Question: What is the power of the oil-free air compressor? Answer: Usually the electric motor oil-free air compressor is the main body of a gas source device, which is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy. And Shanghai Grank
Whether the air compressor needs cooling water depends mainly on its cooling method. There are two main cooling methods for air compressors: air cooling and water cooling. Air-cooled air compressor: This compressor does not require cooling water. They dissipate heat through built-in fans and radiators,
The pulp and paper industry requires high-temperature compressed air in some processes, but it is not necessary for the whole process, and its use depends on the specific process needs. The following is a detailed analysis: 1. typical application scenarios of high temperature compressed air pulp molding and drying in pulp molding
In the compressed air system, the pipeline is the key component of gas transmission, and its pressure resistance level should be scientifically matched with the working pressure of the air compressor to ensure the safe and stable operation of the system. Granklin water lubricated screw air compressor rated pressure
In the fine and complex process of enamel products manufacturing, air compressor, as one of the key equipment, plays an indispensable role. Especially in the use of Shanghai Granklin Group production of water-lubricated screw air compressor, its role is more incisively and vividly
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
