2026-04-09Views：
As an important form of energy generation, air compressor is widely used in various industries, and there are many details in its maintenance. Do a good job of maintenance, in order to extend the service life of the air compressor.
In this regard, we put forward several suggestions:
1, should choose a wide, good lighting place, in order to facilitate the air compressor operation, maintenance and repair of the required space and lighting.
2. The ground in the air compressor room must be smooth and hard (general cement floor is enough). At the same time, attention should be paid to keeping the ground clean and free of debris accumulation, especially flammable and explosive materials, and fire extinguishers and other facilities should be equipped to ensure the safety of the machine room.
3, the placement of the air compressor should pay attention not to stick to the wall, to reserve a certain distance, to ensure a certain ventilation and maintenance space, but also conducive to the maintenance and maintenance of the air compressor.
Air compressor
4, the air compressor room should maintain a certain ambient temperature, should not be higher than 35 ℃, should not be lower than 0 ℃. Note that the temperature of the air compressor room should be controlled at a lower state as much as possible. The air compressor absorbs higher temperature air, which will reduce the exhaust air volume.
5. The place where the machine room is located should be kept dry, with good ventilation conditions, less dust and fresh air. Try to avoid dusty, oily and humid environments to reduce damage to the air compressor and prolong its service life. Moreover, the air compressor should not inhale corrosive gases, paint molecules and gases containing explosive or unstable chemical components or steam, so as not to endanger the users of the air compressor or cause rapid damage to the unit.
6, the operator should read the operation manual before the operation and maintenance of the air compressor, when there is an accident (including the operating state), must immediately notify the equipment after-sales service personnel. At ordinary times, attention should be paid to the maintenance and maintenance of the parts of the air compressor on a regular basis, so that the machinery and equipment are in the best operating state.
7. The pressure pipeline in the air compressor room is strictly prohibited from bumping, and it is strictly prohibited to disassemble and assemble under the condition of being charged with pressure.
8, even under reasonable use environment, the compressed air will still contain a lot of water and trace oil, which will reduce the production efficiency and product quality of the factory, and the untreated air can not be directly used for breathing or food contact, so it is necessary to device the corresponding compressed air purification treatment equipment.
This depends on the pressure of the air outlet of your air compressor, that is, the working pressure of the air compressor. The purchase of the pipeline is determined according to the pressure of the air compressor. Generally, the pressure of 3-5KG is called low pressure, 7-13KG is called medium pressure, and more than 13KG is called high pressure.
The large maintenance cycle of the air compressor usually depends on a number of factors, including the use of the environment, the frequency of use and the specific condition of the equipment. In general, the major maintenance of air compressors in continuous operation for 8000 to 10000 hours is a more common practice. However, this
As an indispensable equipment in the industrial field, the safety and stability of the air compressor has a vital impact on the normal operation of the enterprise. In order to ensure the safe operation of the air compressor, a series of safety issues need to be checked regularly. The following is based on
The replacement cycle of the air filter (air filter) of the air compressor is not fixed. It depends on many factors, including the use environment of the air compressor, air quality, running time and the quality of the filter. Generally speaking, the replacement cycle of the filter can be based on the manufacturer
The quality standard of compressed air for food blown film is that the total oil content is below 0.01mg/m3. Compressed air for food film blowing has a standard oil content of 0.01mg/Nm3 and a gas production of 10 Nm3/min. The cumulative oil content in one hour is 6mg and 180g a month.
In the air compressor industry, permanent magnet frequency conversion technology is gradually becoming the mainstream trend of the market because of its high efficiency, energy saving and stable operation. Among the many manufacturers of permanent magnet variable frequency air compressors, Shanghai Granklin Group relies on its excellent technical strength and rich production experience.
There is a difference in price between permanent magnet motors and power frequency motors. Generally speaking, the price of permanent magnet motors is higher than that of power frequency motors. The following is a detailed analysis: 1. the reason for the high price of permanent magnet motor Material cost: permanent magnet motor uses silicon copper sheet, copper wire and rotor inlay
In the pursuit of efficient, environmentally friendly industrial era, oil-free air compressor with its unique advantages to become the new darling of the market. As a leader in the industry, the water-lubricated screw air compressor produced by Shanghai Granklin Group is based on its excellent performance and innovative design concept.
Air compressor has a wide range of applications in the medical field, mainly including the following aspects: medical ventilator: air compressor by generating high-pressure gas and into the ventilator, so that patients can get enough oxygen and other treatment of gas, is the treatment of breathing
Air compressors, namely air compressors, are widely used in various occasions that require compressed air power. The following are some of the main application areas of air compressors: Power industry: In the power industry, air compressors are mainly used to drive pneumatic tools, pneumatic control systems and instruments
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
