2026-04-09Views：
how often should the air compressor be maintained? What are the items every time?
1. The first regular maintenance time of the air compressor is 500 hours, and the oil filter, air filter element and lubricating oil need to be replaced for 500 hours.
2. After the initial maintenance, do major maintenance every 3000 hours. The oil filter, air filter element, oil and gas separation core and lubricating oil need to be replaced for 3000 hours.
3. When the maintenance time arrives at the display panel, it will automatically alarm and remind, so the parameters of the display panel must be modified after each maintenance.
Maintenance seems simple, but in fact there are many small details, an unprofessional maintenance, it is possible to bring irreversible damage to your air compressor equipment.
When the air in the air compressor contains moisture, the following measures can be taken to deal with it: 1. check and maintain the drainage system to install the drain valve: install the drain valve at the bottom of the air storage tank of the air compressor, and drain the condensate regularly. This is to prevent liquid water from accumulating in the system
The types of enterprises that need air compressors and the application scenarios of water-lubricated air compressors 1. the core types of enterprises that need air compressors manufacturing automobile manufacturing: used to drive pneumatic tools (such as wrenches and spray guns), automation equipment and tire inflation. Mechanical
In PCB (printed circuit board) factories, the type of air compressor depends on the specific needs and configuration of the factory. Generally speaking, PCB factories will choose to use oil-free air compressors, mainly because of the high requirements for the purity of compressed air. In the PCB production process,
Air compressors are widely used in industrial production. They are used to provide power or handle various process requirements. The following are some common types of factories that use air compressors: manufacturing factories: including automobile manufacturing, machinery manufacturing, electronic equipment
Air compressor maintenance and maintenance: daily maintenance: good maintenance and maintenance is the guarantee of the normal operation of the unit, but also to reduce the wear of parts and extend the life of the compressor unit. Before starting the machine, check the compressor lubricating oil level. If the oil level is too low, add oil to check whether the joints are reliable and whether there are bolts and nuts loose or damaged. After the unit is started, check whether each value displayed on the display is normal, check whether the unit has leakage phenomenon, if any, immediately shut down and release all pressure of Part C for treatment.
The central role and special requirements of air compressors in the food industry 1. power support and equipment drive The air compressor provides stable air source power for the food production line and drives the operation of key equipment such as filling machine, bottle blowing machine and inkjet printer. For example, in the beverage filling
A pressure of 13kg can be converted to 1.3MPa (megapascals). Since the pressure of 1kg is equal to 0.1MPa, the pressure of 13kg is equal to 13 x 0.1MPa = 1.3MPa. In physics, pressure refers to the vertical force on a unit area, using the formula P = F/S table
The oil-free level standard of air compressor mainly refers to the international standard ISO 8573-1, which classifies the oil content in compressed air in detail. In the definition of oil-free level, the main concern is that the oil content in compressed air must be very low to meet the requirements of air quality.
The oil content standard of industrial compressed air varies according to the application field and industry requirements. It is usually divided into several grades. The common standards range from Class 0 (≤ 0.01 mg/m & sup3;) to Class 5 (>5 mg/m & sup3;), as follows: 1. international standards (ISO 85
1. The air compressor oil shall be replaced every 2000 hours or 3 months after operation. It shall be replaced every time. First, clean the oil in the oil-gas separator, then clean the oil cooler oil, then init for 3 seconds, stop the machine, clean the oil in the inner cavity of the main engine head, add 2 liters of new oil, and init for 3 times.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
