2026-04-09Views：
Screw air compressor in the use of the process is the need for maintenance and maintenance, granklin air compressor company to provide you with air compressor maintenance methods.
The correct maintenance and maintenance of the screw air compressor plays a vital role in the service life and operational reliability of the screw air compressor.
Air compressor intake air filter maintenance and maintenance is also a necessary step. The air filter is a component that filters out air dust and dirt, and the filtered clean air enters the compression cavity of the screw rotor for compression.
Because the internal clearance of the screw compressor only allows particles within 15u to be filtered out. If the air filter element is blocked and damaged, a large amount of particles larger than 15u will enter the screw machine to circulate, which will not only greatly shorten the service life of the oil filter element and the oil fine separation core, but also cause a large amount of particles to directly enter the bearing cavity, accelerate the bearing wear and increase the rotor gap. The compression efficiency is reduced, and even the rotor is boring and seized.
It is better to maintain the empty filter element once a week, unscrew the gland nut, take out the empty filter element, use 0.2-0.4Mpa compressed air to blow out the dust particles on the outer surface of the empty filter element from the inner cavity of the empty filter element, and wipe the stolen goods on the inner wall of the empty filter shell with a clean cloth. Reinstall the air filter element, and pay attention to the sealing ring at the front end of the air filter element to fit tightly with the inner end surface of the air filter housing.
The oil-free air compressor cannot be refueled. The following are some explanations about the oil-free air compressor: Working principle: The oil-free air compressor does not need to use lubricating oil to lubricate the mechanical parts during operation. This design ensures compression of the output
Question: How long does the water-lubricated oil-free air compressor generally need to replace the filter element? Answer: The filter element replacement cycle of the water-lubricated oil-free air compressor is generally about 3000 hours. The filter element is an important part of the air compressor, which can effectively filter out various impurities and avoid
The specific value of the pipe network pressure of the factory air compressor is not fixed, it will be affected by many factors, including the design pressure of the air compressor, the design of the pipe network, the demand of the gas equipment and the operation status of the system. The following is the pressure on the factory air compressor pipe network
The level of compressed air used in food processing is very strict to ensure the safety and hygiene of food. These requirements usually follow relevant international or national standards, such as ISO 8573-1, and cover many aspects, including purity, microbial content, particulate matter
This depends on your request! If you require a high degree of oil-free cleanliness, buy an oil-free screw machine; if you can accept micro-oil, you can buy an ordinary screw machine with a freeze dryer, an adsorption dryer, and a 4-level precision filter. If the food industry is not directly
Permanent magnet air compressor is not a brand, but a type of air compressor. It refers to the use of permanent magnet synchronous motor to drive the compressor rotor, and adjust the power frequency of the compressor through frequency conversion technology to adjust the output pressure, flow and power of the compressor
Air compressor, referred to as air compressor, its main use is wide and diverse, can be summarized in the following aspects: power supply: air compressor is the power source of pneumatic tools, pneumatic machinery and other equipment. It provides continuity for these devices by compressing and storing air.
Medical air compressor is a special equipment for the hospital to produce clean compressed air, and water lubricated air compressor because of water instead of oil, so that the production of air is more pure, especially suitable for use in hospitals such a place with high air quality requirements, silently guarding the safety of patients.
The working pressure of the air compressor is an important technical parameter, which is usually determined according to the specific application requirements and the design of the air compressor. Generally speaking, the working pressure range of the air compressor is wide, which can meet the needs of different industrial occasions. In common industrial applications
Analysis of Water Treatment Method for Water Accumulation in Air Compressor Pipeline During the operation of air compressor, water vapor in compressed air is easy to form water accumulation in the pipeline when it is cold and condensed. If it is not treated in time, it may lead to equipment corrosion, gas end failure, product quality decline and other problems. Water from the following
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
