2026-04-09Views：
1. Add the following net cover at the air compressor room and air inlet of the air compressor.
2. Regularly purge the air inlet of the air compressor, filter cotton, cooler and cooling fan cover of the motor.
3. Regularly observe the operating temperature of the air compressor. In case of high temperature, check the unit in time. 4. Contact our service provider in time if you have any questions to avoid long-term "sick" work of the machine.
Want screw air compressor
efficient and stable operation, in addition to regular maintenance, daily maintenance and inspection is also very important. Here are five good habits of permanent magnet air compressors in use.
1. Keep the air compressor station clean and tidy.
Dust and debris oil will not only pollute the lubricating oil, increase the wear and corrosion of parts, but also cause machine failure. Keeping the machine room clean can effectively extend the service life of the machine and ensure the normal operation of the machine.
2. Check the air compressor accessories.
Regularly check whether the air compressor accessories are loose and whether the pipe joints are leaking. It should be noted that the use cycle of consumable parts of air compressor accessories should be recorded. After reaching a certain period, it must be cleaned and replaced in time.
3. Air compressor lubricating oil.
Check the oil level of the lubricating oil. Once it is lower than the oil level, it should be added in time. Be careful not to mix different brands of air compressor oil, and add new oil only after discharging clean old oil.
4. Drain water from the air storage tank.
Gas storage tank, cooler and oil-water separator should release oil and water frequently;
5. Check the unit motor.
Always check whether there are sundries in the motor, whether the coil is damaged, whether the stator and rotor are rubbing, to prevent the motor from being burned after starting;
6. Pay attention to the operation status of the unit.
Always pay attention to the instrument, air pressure reading and unit sound when the air compressor is running. Timely troubleshooting of abnormalities. Secondly, the pressure in the gas tank shall not exceed the pressure specified in the nameplate. The unit drain valve shall be opened 1~2 times every 2~4 hours to drain clean condensate. Do a good job of cleaning the machine at the same time pay attention to the long time after the machine running can not be washed with cold water.
The above is the daily use of air compressor need to pay attention to a few points. Standardized use of air compressor can ensure smooth production.
The oil content of compressed air grade is different according to different standards and application fields. The following are the oil content levels of compressed air according to ISO 8573 standards and other specific application standards: ISO 8573 standards: Class 1(Class
Whether the electrical equipment of the air compressor room needs to be explosion-proof depends on the specific environment and application requirements of the room. The specific analysis is as follows: 1. the scene that needs explosion-proof There is an environment of flammable and explosive gas or dust. In chemical, petrochemical, coal, natural gas processing
The oil content in the air is really interesting! Did you know that air is a ubiquitous presence in our lives, and the amount of oil in it is so small that we can almost ignore it. Under normal environmental conditions, large
The biological industry has strict requirements for compressed air, which are mainly reflected in the following aspects: Pressure: The air pressure at the outlet of the air compressor is usually required to be between 0.2 and 0.35MPa. This range can ensure that the compressed air is transported and used.
The maximum working pressure of the air pressure pipeline shall be comprehensively determined according to the pipeline material, design standards and actual use scenarios, and the core is to ensure the safety of gas supply and equipment stability. 1. Pressure range for common industrial scenarios Design Highest Work for Air Pressure Piping for General Industrial Use
Oil-free air compressors have a wide and critical role in high-end manufacturing, food and medical fields. The following is a general description of the application of oil-free air compressors, and then the specific work of water-lubricated oil-free air compressors of Shanghai Granklin Group in these fields.
Today, with the highly developed automation of food enterprises, compressed air has been widely used. For some special processes in the food industry, compressed air may also come into direct contact with the product. Like some special chemical areas, the air may have been polluted, such
The oil content of oil-free air compressor is an important technical index, which is directly related to the purity of compressed air and the applicability of the application field. The following is a detailed analysis of the oil content of the oil-free air compressor outlet: the definition and characteristics of 1. oil-free air compressor
The maintenance cycle of the air compressor varies according to the usage and equipment model, but the following general maintenance rules can usually be followed: Daily maintenance: Check whether the pipeline is leaking. Check oil level, air filter element and coolant level. Easy to check
When looking for an efficient, environmentally friendly, oil-free screw air compressor, Shanghai Granklin Group is undoubtedly a reliable choice. The water-lubricated screw air compressor produced by the group stands out in the market with its unique technical advantages and excellent performance. Water
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
