2026-04-10Views：
The replacement cycle of the three filters of the air compressor will be affected by many factors, such as the working environment of the air compressor, the frequency of use and the quality of the filter element. Here are some general recommendations:
air filter:
in general, the replacement cycle of the air filter is recommended to be replaced every 500 to 1000 hours or at least once a year.
If the environment where the air compressor is located is dusty or has a large amount of dust and other pollutants, it is recommended to speed up the replacement frequency.
Oil filter:
the oil filter should be replaced after 300~500 hours of initial operation of the new machine, and replaced after 2000 hours of use for the second time, and then replaced every 2000 hours according to the normal time.
For the use of the environment is more harsh, it is recommended to shorten the replacement cycle to ensure the cleanliness of the oil and the normal operation of the air compressor.
Oil and gas separator:
the oil and gas separator is generally recommended to be replaced once a year to ensure the normal operation and service life of the equipment.
If the air compressor is used very frequently, it is recommended to shorten the replacement cycle to once every six months to maintain the stability of its performance and prevent excessive internal accumulation of dirt.
It should be noted that the above suggestions are for reference only. In actual operation, the replacement cycle should be reasonably adjusted according to the specific conditions of the air compressor and the use environment. In addition, regular inspection and cleaning of the filter element is also an important measure to maintain the performance of the air compressor. If the filter element is found to be severely blocked or damaged, it should be replaced in time.
The pressure of compressed air in the factory will vary according to different applications and needs. The following are some key points about the pressure of compressed air in factories: Common pressure range: Generally speaking, the normal pressure range of industrial compressed air is 0.6 ~ 0.8MPa
In the field of process gas compression, the water-lubricated screw air compressor produced by Shanghai Grankering Group has won wide market recognition for its excellent performance and environmental protection characteristics. This air compressor is specially designed to handle various process gases, which not only meets the needs of industrial production
It is suggested to allocate 110 cubic meters per minute, plus a margin of about 20% to deal with production fluctuations and pipeline leakage. That is to say, with a water-lubricated oil-free air compressor of about 130 cubic meters per minute, plus a cold dryer or a suction dryer for post-treatment, it is basically enough.
Analysis of Oil Content in Atmospheric Environment and Compressed Air Oil content in atmospheric environment is usually at a very low level, and the specific value is affected by geographical location, environmental conditions and other factors. In a clean outdoor environment, the amount of oil in the air (mainly from motor vehicle exhaust, industrial
In the chemical industry, screw compressors are widely used in the following aspects: Gas compression and synthesis: Screw compressors can realize the compression and synthesis of gas, which is particularly important in petrochemical production. For example, hydrogen production streams in petroleum refining and petrochemical companies
In the pharmaceutical industry, air compressors play a vital role, and their main uses can be summarized as follows: 1. to provide power for pharmaceutical equipment. Power source for pneumatic components: Air compressors can provide pneumatic components in pharmaceutical equipment, such as cylinders, Pneumatic valves, pneumatic
In the field of modern industry, efficient and environmentally friendly compression equipment has been paid more and more attention. The low-pressure oil-free and water-lubricated screw air compressor produced by Shanghai Granklin Group is an outstanding representative of this trend. The air compressor uses advanced water lubrication technology, Che
Correct daily maintenance and use can extend the service life of the oil-free air compressor and avoid or reduce the occurrence of failures. Accurate use environment: 1) The normal use environment of the air compressor is 5 ℃-40 ℃
The working pressure range of air compressors varies according to their type, specifications and usage scenarios. The following is the information compiled according to different sources and authoritative data: the working pressure range of 1. low-pressure air compressor is usually between 0.4 MPa and 1.2 MPa, and it is also said that low pressure
The semiconductor industry does use compressed air, and compressed air plays a vital role in the semiconductor manufacturing process. The following is a detailed explanation of the use of compressed air in the semiconductor industry: 1. the application of compressed air in semiconductor manufacturing
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
