2026-04-09Views：
How to maintain an oil-free energy-saving air compressor?
Correct daily maintenance and use can extend the service life of the oil-free air compressor and avoid or reduce the occurrence of failures.
Accurate use environment:
1) The normal use environment of the air compressor is 5 ℃-40 ℃. Don't put it in a covered place, and don't work in a damp and dark place. Should be strictly in the storage of flammable and explosive liquefied gas and dusty volatile gas work place.
2) Keep the environment clean and tidy to avoid unnecessary accidents.
3) Timely drain the sewage in the gas storage tank. It is recommended to drain at least once a week.
4) Clean the filter in time according to the usage, check the accessories and cables regularly, and replace them immediately if they are damaged.
5) Keep the machine clean, dry and free of oil pollution to give full play to its functions.
6) When the air compressor is not used, the air in the air storage tank should be emptied, and the sewage in the air storage tank should be emptied, and stored in a dry environment.
7) Note that the power supply voltage is consistent with the nameplate of the air compressor.
8) When the power supply voltage is higher than the common voltage of the air compressor, it may cause personal accident and damage the air compressor. When the power supply voltage is lower than the common voltage of the air compressor, it may cause poor starting and even damage the motor.
9) Be sure to operate within the pressure range set by the factory (generally, the maximum pressure of the factory is set to 8 Bar, and the safety pressure relief is 8.8Bar), otherwise the gas tank will explode. (For special pressure, please contact the manufacturer to customize).
10) When not in use after work, develop the habit of cutting off the power in time.
In the pharmaceutical industry, high-pressure compressed air plays a vital role in many production processes and equipment. The following are the main aspects that require high-pressure compressed air: 1. Liquid preparation production filling machine: In the production process of liquid preparations, filling machines often use high pressure
The air compressor belongs to the general mechanical type. The air compressor (English: air compressor) is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy.
Answer: There are many types of air compressors, and the common industrial air compressor is screw air compressor. We talk about the maintenance of water lubricated oil-free air compressor (single screw air compressor): 1. Replacement of air filter element
Common air compressor eight kinds of fault treatment 1. air compressor can not start first check whether there is a control voltage. If not, check whether the fuse is in good condition; if there is control voltage, check whether the control relay and time relay are running correctly
1. According to its principle, it can be divided into volume type compressor and speed type compressor. Volume type is divided into: reciprocating compressor, rotary compressor; speed type compressor is divided into: axial compressor, centrifugal compressor and mixed flow compressor. Household today.
The rated air volume of the air compressor is not the larger the better, but the appropriate size needs to be selected according to the actual use. The rated gas volume refers to the gas flow that the air compressor can produce per unit time under the rated working condition, which reflects the production capacity of the air compressor. in the actual
The oil-free variable frequency screw air compressor has many advantages, including energy saving, environmental protection, stable operation, low noise, low maintenance cost, and long service life. The following is a specific introduction: energy saving: oil-free frequency conversion screw air compressor adopts advanced frequency conversion technology, which can be based on
Whether the import and export gas volume of the air compressor is equal depends on the specific working mode and conditions. In the actual situation, due to factors such as gas leakage and moisture discharge during the compression process, the inlet and outlet gas volume (by mass or mole) of the air compressor is not always equal
A processing center usually needs a power between 7.5kW and 22kW and a displacement of 0.5m & sup3;/min to 1.2m & sup3;/min air compressor, the specific selection shall be determined comprehensively in combination with the air consumption of the equipment, simultaneous use coefficient, leakage rate and actual working condition requirements.
Q: How much air compressor is used in the factory? A: If you don't know how much flow of compressed air the factory needs, you can consult the supplier of your production equipment first, they will have an accurate flow rate. In assessing whether other aspects
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
