2026-04-09Views：
The water supply of the water-lubricated air compressor is controlled by the system. The water vapor cylinder will replace the water in the head of the water-lubricated air compressor with pure water many times.
Water replenishment is not performed at one time. Without affecting the work of the water-lubricated air compressor head, the lubrication water is replaced many times to achieve the purpose of automatic water replenishment.
Granklin air compressor manufacturers mainly produce water-lubricated screw air compressors. The whole machine is made of stainless steel and independently produces water-lubricated air compressor heads.
Compared with other forms of oil-free air compressor, oil-free water lubrication air compressor has obvious advantages:
1, the use of water as a compression seal, cooling medium, the use of low cost.
Through advanced sealing and isolation technology, the compressed air is cleaner and can be pure oil-free.
3, the volumetric efficiency is higher, more energy-saving, more than two dry twin screw energy saving more than 15%, more than a dry twin screw energy saving more than 36%.
4, to avoid frequent dry screw, high host maintenance, more stable and reliable.
5, lower noise, single screw axial and radial force balance, star wheel in the water film lubrication with the screw free rotation, so the host components in low load smooth operation, to ensure low noise and durability.
6, compared with the traditional air compressor to save lubricating oil and oil filter and oil and gas separation core and other consumables, thereby reducing maintenance costs (one year is the traditional micro-oil air compressor 1/5 maintenance costs)
7, no oil, so the use of more environmentally friendly.
When comparing which is more expensive with oil and no oil, it can be analyzed from the following aspects: 1. purchase cost Oil-free air compressor is relatively expensive due to its high manufacturing process, material cost and technical difficulty. Generally, no oil.
Air compressors are widely used in hospitals, but equipment needs to be selected according to the needs of medical scenarios such as oil-free, silent, and high stability. The following are the main application departments and uses: 1. core application departments operating room uses: for anesthesia machines, ventilators, electric operating beds, etc.
The difference between power frequency air compressor and permanent magnet variable frequency air compressor is mainly reflected in the following aspects: motor type and efficiency: power frequency air compressor usually uses squirrel cage motor, and there will be 7%-15% loss in the process of converting electrical energy into kinetic energy. permanent magnet frequency conversion
The compressed air quality standards generally used in factories mainly include the following aspects: Oil content: The oil content in compressed air is usually required to be low to avoid pollution to equipment and processes. In general, the oil content should be less than 5mg/m3. Moisture content
Screw air compressor is an indispensable gas equipment in the production process of modern enterprises. It is an important gas source for enterprise production. Its application range is wide. The main application industries include the following: 1. Power industry, instrumentation, ash removal, factory miscellaneous compressed air system, water
The slow gas charging speed of the oil-free air compressor may be caused by the following factors. It is necessary to ensure the efficient operation of the equipment through system investigation and maintenance: 1. The air intake system is blocked The air filter is used as the first barrier for air to enter the compressor. If it is not cleaned or replaced for a long time, it will be
The textile industry, as an important application field of compressed air, has strict requirements on air source quality, pressure stability and system energy efficiency. The following from the air quality, pressure control, energy-saving design and system reliability four
The oil content of oil-free air compressors is very low, usually between 0.001 and 0.01 mg. This low oil content ensures the purity of the compressed air and meets the high air quality requirements of many industrial applications. Oil-free according to ISO 8573-1 industry standard
When the compressed air consumption is higher than the gas production, it is like the expenses of a large family suddenly exceed the income, which makes people feel a little unprepared. This situation may be caused by several factors, let us explore the mystery of it. First of all, can
There are several major differences between oil-free compressed air and oil-free compressed air. These differences are mainly reflected in whether lubricating oil is used in the compression process, air quality, type of compressor used, and maintenance and use costs. compression process
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
