2026-04-15Views：
Scenarios that require compressed air in hospitals are mainly concentrated in the key links of the medical process, and have extremely high requirements for air quality, including:
medical equipment drive is one of the important applications, such as ventilator, anesthesia machine, dental treatment equipment, these equipment rely on compressed air as a power source, to ensure that the air is free of oil and impurities, to avoid oil pollution affecting the accuracy of the equipment or causing potential risks to patients; in the operating room, compressed air is often used for equipment cleaning, disinfection and driving some surgical tools, clean air can prevent the risk of infection caused by pollution during surgery; in wards and emergency scenes, oxygen supply systems, atomization treatment equipment, etc. also need stable and clean compressed air support to ensure the safety of patient treatment; in addition, hospital laboratory instruments (such as gas chromatograph, cell culture equipment) and sterile packaging, preparation production links, also rely on oil-free compressed air to ensure accurate experimental results or product hygiene standards.
Granklin air compressor adopts water-lubricated single screw compression technology, realizes gas compression through the cooperation of single screw and star wheel, and replaces traditional lubricating oil with water medium to complete lubrication and cooling function. This design eliminates the risk of oil pollution from the source, and the output compressed air is free of oil and impurities, which can stably meet the strict requirements of air cleanliness and safety in various scenarios of hospitals, and provide reliable gas compression solutions for medical processes.
The water-lubricated compressor is a special compressor that uses water as the lubricating medium instead of the traditional oil lubrication. When this compressor is running, water will play a role in cooling, sealing and lubrication. Regarding the air moisture content of the water-lubricated compressor, this is a
The variable frequency air compressor realizes efficient gas consumption through intelligent adjustment technology. Its core principle is to dynamically adjust the operating state according to the actual gas demand to avoid energy waste and ensure the stability of the system. Traditional air compressors usually run at a fixed speed.
The installation position of the cold dryer (freeze dryer) in the compressed air system should be comprehensively considered in combination with the process requirements, equipment characteristics and system efficiency. The following is an authoritative analysis based on technical principles and practical experience: 1. Typical Configuration Scheme Comparison Configuration Scheme
The replacement cycle of air compressor oil is divided into three situations: 1. Mineral oil is replaced every 3 to 4 months; 2. Semi-synthetic oil is replaced every 6 to 8 months; 3. Fully synthetic oil is replaced every 10 to 11 months. The air compressor shall have the following conditions
The quality of the air entering the fermenter is critical to the success of the fermentation process. Granklin Group, as a well-known air compressor manufacturer, provides water-lubricated air compressors and oil-free air compressors to meet the demand for high-quality air in the fermentation industry.
When the content of water in the air is expressed in ppm (parts per million), it is not a fixed value, but is affected by many factors such as temperature, humidity, geographical location and climatic conditions. It is usually several hundred to several thousand at normal temperature and pressure. Between ppm. specify the influencing factors in the air
The output pressure (pressure) of general industrial compressed air is usually determined according to the requirements of specific application scenarios, and the common range is between 0.2MPa and 1.0MPa (1MPa is approximately equal to 10 kilograms of force per square centimeter). This pressure range can cover the operating needs of most industrial equipment
Whether the air compressor can always run depends on the design, manufacturing process, use environment, load situation and maintenance of the air compressor. In theory, if the air compressor is properly maintained and maintained, and the operating environment is good, it can be
Oil free screw air compressor relative micro oil screw air compressor has the following advantages and disadvantages: 1, advantages: (1), micro oil due to high viscosity of lubricating oil, oil storage equipment can not be completely removed. Oil-free screw air compressors are mostly used for cleanliness in food, medicine, etc.
The selection of compressed air pipe materials should be combined with the use environment, process requirements and long-term cost comprehensive evaluation. Carbon steel and stainless steel have their own applicable scenarios: 1. Characteristics and applicable scenarios of carbon steel pipes Carbon steel pipes with high strength and low cost, suitable for dry or low corrosive environments
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
