2026-04-10Views：
The rear end of the air compressor is generally equipped with a gas storage tank. There is a drain valve at the bottom of the gas storage tank. Just open the drain valve every morning before starting the machine.
1. The air compressor will have a drain valve at the lowest part of the cooler;
2. After the air compressor is exhausted, a cold dryer or dryer shall be installed;
3. The drain valve of the cold dryer (dryer) also needs to be checked regularly;
4. Drainage valve shall be provided at the lowest end of the air storage tank;
5. There should be a drain valve at the lowest point of the pipeline, which can be installed at multiple points.
6. If the weather is wet, you can open the manual drain valve a little bit to drain the water.
Granklin Group's water-lubricated oil-free screw compressors, from design to manufacture, everywhere reflect our pursuit of energy saving, cleanliness and environmental protection. From water lubrication to non-corrosive main engine shell, from stainless steel screw to silicon carbide sliding bearing that never rusts, from high-efficiency air filter to precision lubrication water filter, we ensure that XR parts are oil-free working design, we have always believed: professional casting quality, quality casts the future!
The screw air compressor is an oil-injected single-stage twin-screw compressor. It adopts high-efficiency pulley transmission to drive the main engine to rotate for air compression. The compressed air in the main engine is cooled by oil injection. The air and oil mixed gas discharged from the main engine are coarse and fine. Two separate
Oil-free, clean, dry and hygienic gas source creates a good treatment environment for doctors and patients; lasting and stable gas source ensures the operation; low noise, energy saving, high-quality parts, reduce end customer expenses and increase service life.
Screw air compressor as one of the most widely used industrial machines, in the operation of the need to pay attention to what aspects of the problem from the main five aspects can be made clear, although not comprehensive enough, but the more common problems are mentioned. 1. Screw rod empty
1. operators must be familiar with the structure, performance and working principle of the air compressor, and master the operating procedures of the machine. Before starting the 2., the following checks must be made: 1. Whether the electrical switch and grounding wire are in good condition and reliable; 2. Safety valve
The water-lubricated integrated air compressor produced by Shanghai Granklin Group, the water-lubricated air compressor widely praised by users, provides users with pure oil-free compressed gas.
The main maintenance method of screw air compressor is to replace the three filters and one oil. The main methods are: 1. Air filter element. It needs to be replaced after 1500 hours of work; 2. Lubricating oil filter element. Daily use about 2000 hours need to be replaced; 3, oil and gas
What is the difference between a fixed screw air compressor and a variable frequency screw air compressor? Most of the variable frequency air compressors are also fixed, and the fixed screw air compressors include variable frequency air compressors and water lubricated air compressors produced by Grantklin Group are also fixed.
View detailsThe general classification of air compressors has the following methods: 1. According to the gas transmission volume, the so-called gas transmission volume refers to the volume of each minute of gas discharged by the air compressor when it is working, which is converted into the suction state. The small exhaust volume is less than 10 cubic meters/minute, the medium volume is 10-100 cubic meters/minute, and the large volume is large.
The safety technical operation specifications for air compressors are as follows: 1. The equipment must be specially assigned and certified. 2, to follow the air compressor safety operation procedures. 3, must be familiar with the structure of the air compressor, principle and performance. 4. Operation
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
