2026-04-10Views：
Screw air compressor water cooling components include cylinder, intercooler, air compressor after cooler and lubricating oil cooler, etc. Its normal operation is closely related to these components. So, what if the screw air compressor is found to be out of water?
1. One of the purposes of cylinder and intercooler cooling is to reduce the exhaust temperature and control the exhaust temperature within the allowable range. It can be seen that after the screw air compressor is cut off, the cylinder and the intercooler cannot be effectively cooled, and the exhaust temperature of the air compressor rises rapidly. This will not only cause the lubricating oil in the cylinder to lose its lubricating performance, but also cause a considerable part of the moving parts to wear, and will decompose the lubricating oil, and the volatile components in the oil will mix with the air, causing accidents such as combustion and explosion.
2. For the after-cooler, the water cut-off of the air compressor will cause the after-cooler to lose its cooling effect. In this way, the temperature of the air fed into the air separation plant will rise too high, and the normal working condition of the air separation plant will be destroyed.
3. For the air compressor lubricating oil cooler, the water cut-off of the air compressor will make the lubricating oil not well cooled, and the temperature of the air compressor lubricating oil will also increase. In this way, the viscosity of the lubricating oil will decrease, the lubrication performance will become worse, and the moving parts will also be quite damaged, which will increase the power consumption and reduce the service life of the mechanical equipment; the heavy will cause the lubricating oil to decompose and the volatile components in the oil will be mixed into the air. In, causing a series of equipment accidents.
In short, the screw air compressor in the operation process, cooling is a very important link, the air compressor should always pay attention to the cooling water, once the water must be stopped immediately maintenance.
For medicine, food, semiconductor, chemical industry, fermentation and other industries, oil-free and clean compressed air must be the first choice. Oil-free oil-free screw air compressor, water-lubricated oil-free screw air compressor, oil-free scroll air compressor and oil-free centrifugal air compressor are common oil-free.
Shenzhen screw air compressor quotation manufacturers, Shenzhen screw air compressor professional manufacturers choose air compressor models should also pay attention to the noise limit of air conditioning compressor application areas. Shenzhen screw air compressor quotation manufacturer in screw compressor, steel cylinder
It is understood that the use of screw air compressor users more or less, or large or small are almost experienced host or motor overload. When the screw air compressor is running under unloading conditions, its energy consumption rating is 30%-40%. The energy saving effect of permanent magnet motor is better than that of power frequency and ordinary frequency conversion in the case of low load.
1. Check the dryer: The dryer is a good way to remove moisture from the air, and the dryer is an inseparable part. Like compressors, dryers are affected by changes in temperature and humidity. As the seasons change and warm days arrive, it takes some time to check the dryer (and air receiver) to ensure its performance.
Screw air compressor factory direct good? Air compressor is a large energy consumption for enterprises, so how to reduce procurement costs! In today's complicated relationship, contact the manufacturer to get the best air compressor price.
More and more enterprises are constantly upgrading their basic equipment, and the "air compressor" as a general machinery has also become a member of the upgrade. At this time, a question is often placed in front of all entrepreneurs. How to pick out the cheap "screw air compressor" from so many "air compressor" brands at home and abroad?
The main function of compressor lubricating oil is to lubricate and seal the male and female rotors and bearings. In addition to lubricating, cooling and sealing the mechanical parts, it also plays a role in cooling the compressed gas. But in the actual production work, if the lubricating oil coking will seriously affect
The choice of screw air compressor first depends on whether you need oil-free or oil-free, and whether the oil and gas of oil air compressor can be within the acceptable range of use. If it is acceptable to choose screw air compressor with oil, the price will be lower. The gas requirements are higher, it is recommended to use the "Shanghai Granklin Group" water lubricated oil-free screw air compressor.
View detailsOil-free air compressor is divided according to whether the compressed air contains oil, which corresponds to oil air compressor or micro-oil air compressor. Oil-free air compressors are distinguished according to different compression forms or different host structures, and manufacturers often choose suitable models according to actual needs. Several common oil-free air compressors are: oil-free piston air compressor, no
From environmental protection and maintenance, of course, it is oil-free air compressor. Oil-free air compressor is a technical improvement of oil-free air compressor. The main difference between oil-free air compressor and oil-free air compressor is the oil content of the gas discharged from the exhaust port. Oil-free air compressor
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
