2026-04-10Views：
In daily life, the situation that the air compressor can't hit the pressure can be seen everywhere. Then the question arises, what is the reason why the air compressor cannot be pressed? What is the cleaning method of the air compressor? Let's understand.
What is the reason why the air compressor cannot be pressed?
1. Increase of gas consumption:
the power of the air compressor cannot meet the requirements of the existing working environment, which will cause the air compressor to fail to press. This phenomenon requires the selection of a replacement machine model.
2. Gas consumption occurs in the pipeline:
part of the pipeline due to the use of time or maintenance factors, will produce some small cracks and the like, resulting in a reduction in gas pressure.
3. The air filter element is blocked:
the poor operating environment of the unit and the lack of timely cleaning or replacement of the air filter cause its blockage. Usually air filter blocked will cause the air compressor gas production decreased. The failure of filter element blockage is also easy to find and deal with, just replace the filter element. In fact, for air compressors, there are not many factors that cause pressure to go up. As long as one by one investigation, the root cause can be found.
4. Aging or failure of machine head:
the head belongs to the core of the air compressor, and it is also an important part of the unit's suction and manufacturing pressure. If there is no problem in other positions, then the problem is usually here. After all, there is no problem in the process and there is a problem in the result, then the problem must be at the source, and the root of the problem that the air pressure of the air compressor cannot go up is the nose.
5. Pressure switch problem:
this is also a part that must be checked when the air compressor is not pressed.
The air compressor can't hit the pressure factors. The key is concentrated in the above aspects. As long as the full grasp of the air compressor structure and the role of the accessories, it can be solved in time in the process of device failure.
Intake valve loading principle steps: 1, start, the motor is turned on, the host starts to run, the intake valve hole suction, the check valve is opened, the compressed oil and gas enter the oil and gas tank, and the lubricating oil in the oil and gas tank is sprayed into the host head (After the temperature control valve). The pressure rises and part of the pressure passes
Oil-free water lubrication screw air compressor has always enjoyed a high reputation in the market. The frequency conversion oil-free system selected by the device can not only reduce the oil content in the compressed air, but also be stable in use. Therefore, the correct use of oil-free air compressor has also become a lesson of concern to users.
The current of the 1. oil-free air compressor is too high: the common reasons for this failure are as follows: 1. The main engine fails 2. The exhaust pressure is too high 3. The voltage is too low: Generally, the power of the oil-free air compressor is Rated, therefore, according to the public
Food, medicine, textile, chemical and other industries with high gas requirements, oil-free air compressors are gradually recognized by enterprises and widely used by more and more companies.
If the permanent magnet air compressor condensate is not discharged for a long time, it will cause rust inside the unit, reduce the effect of lubricating oil, and affect the operation of the air compressor. In summer, it will even cause the air compressor to start and stop constantly. So what is the basic principle of this air compressor?
Water lubricated air compressor routine maintenance costs, compared to the oil screw air compressor maintenance costs are much lower, why? As we all know, there is oil screw air compressor lubricating oil, a barrel of oil is very expensive, including labor costs, parts costs, or occupy a large enterprise expenses. The account is not unknown, the water lubricated air compressor only needs
The specific application role of air compressors in various industries? Air compressors are used in electric power, textile, steel, food, pharmaceutical, breathing, diving, fire fighting, electronics, machinery, equipment, automobiles, packaging, printing, toys, chemicals, energy
Speaking of how much is the water-lubricated oil-free air compressor? This problem, granklin's Shen is a professional counterpart. The main product of our Granklin Group is the water-lubricated oil-free air compressor. Under this topic, Granklin Group, as a senior enterprise in the industry, still has a little experience.
In recent years, the biggest black horse in the screw air compressor market (water lubricated screw air compressor) is a new type of air compressor equipment. Whether it is working principle or lubrication method, it is quite different from the traditional screw air compressor. shanghai granklin group for your detailed introduction under the oil and water lubrication screw air compressor working principle and advantages.
View detailsWith the development of science and technology, the requirements for mechanical equipment in industrial production are getting higher and higher. Now many enterprises are using oil-free air compressors to replace traditional air compressor equipment in order to ensure the quality of production. However, oil-free air compressor equipment and ordinary air compressor equipment
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
