Laser cutting air compressor stainless steel cutting thickness

When cutting stainless steel, the laser cutting air compressor should be equipped with a laser with higher power, and it is better to have more than 1000W if there is no burr at 3mm.

The air compressor can use Granklin Group's oil-free integrated laser cutting air compressor, and the miniaturized screw air compressor is very easy to use.

500W laser cutting stainless steel 1mm is the best, 2mm is acceptable, 3mm 4mm is very difficult, can only be cut off, slag scraping burr is certain.

Therefore, it is necessary for laser cutting manufacturers to use high-power lasers, and the actual application can be seen in your application scenario.

Laser cutting technology has been widely used, buy good equipment, especially the use of laser cutting oil-free air compressor, gas supply, energy saving are the need to pay attention. Air compressor can consult Shanghai granklin group.