Key points of moisture-proof maintenance of screw air compressor

If it is moisture-proof maintenance, you can refer to the following methods:

1. Check whether there is accumulated water around the air compressor. Find out the foundation, geological structure, flood control facilities and emergency rescue facilities in the surrounding area of the air compressor room in detail, find out the hidden dangers and weak links, especially the accumulated water, and clean them up in time.

2. Check whether the air compressor room is leaking or not. Rain leakage and water seepage are easy to occur in rainy season, resulting in short circuit of the circuit, and even causing accidents such as leakage and injury in serious cases. Everyone should check the air compressor room to see if there is any water leakage.

3. Keep the air compressor drain pipe unobstructed and humid air is easy to form condensed water in the air compressor, which must be discharged from the air compressor system in time. The residual condensed water is not only easy to cause the emulsification of the air compressor lubricating oil, but also lead to corrosion and rust of the air storage tank, affecting the quality of compressed air.

4. Check whether the air compressor lubricating oil should be replaced in humid weather. The water content in the air increases. During the compression process, the moisture in the air is mixed with the screw air compressor lubricating oil, which will reduce the lubrication energy efficiency of the oil and accelerate the wear of the main engine rotor.

5. Check the equipment before starting up in rainy and humid seasons. Before starting up the air compressor, pay attention to check whether the machine is flooded and whether the circuit system is in good condition, so as to prevent rainwater from pouring into the electric box and burning electrical components. When the fault is found, it should be repaired in time without delay.