2026-04-09Views：
Q: How much air compressor is used in factories?
Answer: If you don't know how much flow of compressed air the factory needs, you can consult the supplier of your production equipment first, they will have an accurate flow rate.
In order to evaluate whether compressed gas is used in other aspects, a rough range is estimated, and a certain reserved gas volume can be reserved.
Reserving compressed air is to try not to let the air compressor work for a long time, so that the equipment wears out faster and the maintenance cost is also a problem.
Many customers have some difficulties in the difference between oil-free scroll air compressor and oil-free screw air compressor. There are many similarities and differences between the two. The following is based on compressed air quality, pressure ratio, structure, Manufacturing cost, operating cost, exhaust pipe
The presence of moisture in air compressors is a common problem, which may be caused by a variety of reasons, such as high ambient humidity, condensed water during cooling, or compressed air that is not sufficiently dry. The presence of moisture may have a negative impact on the performance and life of the air compressor.
The screw compressor does not work all the time. Its working method is usually adjusted according to actual needs. When the pressure in the air tank reaches the preset upper limit, the air compressor will automatically stop; and when the pressure is reduced to the preset lower limit, the air compressor will
Q: What is the compressed air regulatory standard for the food industry? A: ISO International Standard: ISO 8573-1:2010. Reference content: Compressed air introduced by [National Standard Project-National Standard Information Public Service Platform] Part 1: Pollution
How long does the air compressor need to be maintained? 1.500 hours: When the air compressor runs for 500 hours, the oil filter element and air compressor lubricating oil will be changed for the first time after the new machine is used. Remove the air filter for cleaning and blow it out with low-pressure compressed air
The calculation of the gas consumption of workshop equipment is a complex process involving multiple factors, which requires comprehensive consideration of the type, quantity, working status of the equipment and the actual demand for gas. The following is a rigorous and detailed calculation: 1. determine the type and quantity of equipment first.
The difference between power frequency air compressor and permanent magnet air compressor is mainly reflected in energy efficiency, noise, maintenance cost and functional characteristics. The following is a detailed comparative analysis: 1. energy efficiency: the energy efficiency of the power frequency air compressor is relatively low. due to its motor turn
The scroll unit and the screw unit have their own advantages and applicable scenarios, and it is impossible to simply say which is better. The following are some of their comparisons: Efficiency: Screw units usually have higher efficiency, especially under high load and continuous operation. And the vortex
The oil content standard of screw air compressor is usually stipulated by relevant international, national or industry standards. Generally speaking, for oil-injected screw air compressors, the oil content of compressed air is not more than 3ppm (I .e. the oil content per cubic meter of compressed air is not more than 3 mg)
The reasons for the slow air on the air compressor may involve many aspects. The following are some common reasons and corresponding explanations: 1. air filter problems Air filter: The air filter is responsible for keeping the air entering the compressor clean and free of contaminants. With
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
