2026-04-10Views：
General air compressor pressure is how much depends on its type, specifications and the use of the environment. The following are some common air compressor pressure ranges:
low-pressure air compressors: The working pressure is usually between 0.7 and 1.2 MPa (megapascals), that is, 7 to 12 bar.
Medium pressure air compressor: The working pressure is usually between 1.2 and 3 MPa (megapascals), that is, 12 to 30 bar.
High-pressure air compressor: The working pressure usually exceeds 3 MPa (MPa), that is, more than 30 bar.
In addition, there are some specific types of air compressors with different pressure ranges, such:
micro air compressor: The pressure is usually between 1 and 5 bar.
Light air compressor: The pressure is usually between 5 and 10 bar.
Medium-sized air compressor: The pressure is usually between 10 and 20 bar.
Heavy duty air compressor: The pressure can be up to 25 to 30 bar.
It should be noted that the normal working pressure of the air compressor should be determined by the parameters of the equipment itself, the use environment and user needs. Excessive pressure may lead to increased equipment loss and safety hazards, while too low pressure may lead to unstable airflow and insufficient air pressure, affecting the normal operation of the equipment. Therefore, in practical application, the pressure setting of the air compressor should be adjusted according to the specific situation.
Judging whether the air compressor is operating normally can be observed and checked through the following aspects: Observe the operation indicator of the compressor: the operation indicator of the air compressor should be displayed normally during normal operation. If the indicator light does not light or flashes, it may indicate that the air compressor
When the air compressor is not in use, the air in the storage tank should be discharged, and the sewage in the storage tank should be discharged and stored in a dry environment. It is recommended that the sewage in the gas tank be discharged at least once a week. Keeping the filter and muffler clean can avoid most failures, while unclean filters will reduce the performance of the compressor and the service life of the compressor.
View detailsIn the pharmaceutical industry, the dew point requirements of compressed air are extremely strict, generally need to be controlled below -40 ℃, and some high-risk scenarios even require -70 ℃(ISO8573-1 Class1) to ensure the safety of the pharmaceutical production environment and the stability of product quality. The following from
Regarding the frequency of air compressor oil replacement, this is a problem involving multiple factors, including the type of air compressor, the use environment, the workload, and the manufacturer's recommendations. Generally speaking, in order to ensure the normal operation of the air compressor and extend its service life, regular replacement
The scroll air compressor and the screw air compressor have their own characteristics and application scenarios, so it cannot be simply said that the scroll air compressor can completely replace the screw machine, or vice versa. Both have their own advantages in different applications. Features of scroll air compressor: knot
Whether the air compressor needs to be refueled depends on the type of air compressor. When the reciprocating piston of the piston air compressor moves to the right in the cylinder, the pressure in the left cavity of the piston in the cylinder is lower than the atmospheric pressure, the suction valve opens, and outside air is sucked into the cylinder.
With the rapid development of industry and the gradual improvement of people's living standards, the requirements of the society for the required products have been greatly improved. At the same time, the upgrading of the air compression system has promoted the oil content, water content, and decibels of the compressed gas. The requirements are getting higher and higher. Air compressor plant
In semiconductor production, the quality of compressed air has a crucial impact on the production process and product quality. For particle numbers of 0.1 microns, the specific requirements may vary depending on the production process and equipment. However, generally speaking, in the semiconductor production.
The power saving of screw air compressor depends on the model selection and operating conditions. The frequency conversion model has significant energy saving effect under partial load conditions, and the power frequency model has high energy consumption at full load, and the energy efficiency level, maintenance status, System design and other factors will also affect the actual power consumption.
Air compressor is a large energy consumer in the factory, ordinary air compressor can not achieve environmental protection and energy saving, for the national promotion of energy saving and environmental protection, is any air compressor production enterprises must meet the rigid requirements. So, energy-saving oil-free air compressor manufacturers which is good?
View details
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
