2026-04-09Views：
Q: Does the semiconductor industry use oil-free air compressors?
Answer: There are many technological processes in semiconductors, and it is inevitable to use compressed air.
Oil-free air compressor can look at the water-lubricated oil-free air compressor of Shanghai Granklin Group. The compressed gas does not contain oil and is suitable for multiple processes in the semiconductor industry.
Whether the air compressor needs daily drainage during operation should be judged comprehensively in combination with the equipment use environment, operation time and the amount of condensed water produced. The specific analysis is as follows: 1. The reason why the air compressor produces condensed water When the air is compressed, the water vapor contained in it will drop due to the temperature drop.
Air compressor safety rules and operating procedures 1. safety rules Before starting the air compressor, a comprehensive inspection must be carried out to ensure that all protective devices and safety accessories are in good condition. In particular, safety valves and pressure gauges need to be inspected regularly, usually
Yes, an air compressor is indeed needed in the process of producing chips. In the chip production process, the air compressor mainly provides clean, dry and oil-free compressed air for various pneumatic equipment and process steps, such as purging, drying, transmission, pneumatic control, etc. By
The screw rotation speed of screw air compressor is one of the key parameters affecting the performance of the equipment, and its design should consider the factors such as air supply efficiency, energy consumption control and equipment life. Granklin water-lubricated single screw air compressors have been technologically innovative in screw rotation.
During the operation of the air compressor, if it is shown to exhaust every few minutes, this behavior is usually called "intermittent exhaust" or "periodic exhaust". This exhaust mode is not the continuous exhaust of the air compressor.
Q: What are the requirements for compressed air in the semiconductor industry? A: The compressed air used in the chip industry must meet the highest standards, and the production environment must be pollution-free, and the gas must be oil-free. Compressed air mainly in the field of semiconductor chips
In the choice of air compressor, centrifugal and screw are two common types. According to the demand of air consumption, the following are some suggestions to help you determine which type of air compressor to choose: 1. The stability and fluctuation of air consumption centrifugal air compressor:
Power plants have strict requirements on the oil content of compressed air, usually requiring an oil content of no more than 0.1 mg/m & sup3;(ISO 8573-1 Level 2) or lower, and some key systems even require ≤ 0.01 mg/m & sup3;(Level 1). Specific requirements due to system use and industry standards
Oil-free screw air compressor does not need to add oil. The working principle of the oil-free screw air compressor is to compress the gas through a single screw and star wheels on both sides of the distributed screw. The water-lubricated air compressor of Shanghai granklin Group adopts a single screw scheme to compress the gas.
When two air compressors with different power need to be operated in parallel, the master-slave relationship can be realized by the following methods to ensure the stable and efficient operation of the system: 1. the basic conditions for parallel operation. Electrical system matching: ensure the voltage, frequency and phase of the two air compressors are consistent to avoid
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
