2026-04-13Views：
Different industries have different pressure requirements for compressed air, depending on their specific application requirements and process standards. The following is an overview of compressed air pressure requirements in some common industries:
industrial applications:
in general, the common pressure range of compressed air in industrial applications is between 0.7MPa and 1.0MPa.
Special processes such as sandblasting, spraying, etc. may require relatively high pressures, while certain precision manufacturing or instrument controls may require more stable low pressures.
Power system:
it is mainly used for power source, dust removal and impurity removal in factories, boiler water replenishment, wastewater treatment, etc. Its pressure requirements will vary according to specific equipment and applications.
Textile Industry:
compressed air is mainly used as a power source to drive textile equipment, and the pressure requirements will vary depending on the type of equipment and process requirements.
Food industry:
compressed air is widely used in the food industry, including gas for power equipment and gas transportation in direct contact with products. Due to the particularity of the food industry, the quality requirements of compressed air are very high, usually oil-free, water-free, sterile and rust-free.
Medical areas:
the medical field requires high quality and safety of compressed air, which is mainly used in respiratory therapy and medical equipment. The pressure requirements are usually based on the needs of the medical device.
Agricultural Applications:
the application of compressed air in the agricultural field, such as irrigation, planting, spraying, etc., its pressure requirements will vary according to the specific agricultural equipment and operation needs.
Transportation and Logistics:
in the field of transportation and logistics, compressed air is used for cylinder pressure testing, pneumatic door locks and other devices, and its pressure requirements will also vary according to specific equipment and test standards.
It is important to note that the above overview is only a general guide and does not cover the specific requirements of all industries and applications. In practical applications, it is necessary to determine the pressure of compressed air according to specific equipment, process, product quality and safety requirements. At the same time, in order to ensure a stable supply of compressed air and meet production needs, it is also necessary to be equipped with appropriate compressed air handling equipment and air supply systems.
The maintenance cycle of air compressors varies depending on factors such as equipment type, use environment and workload. In order to ensure the normal operation of the air compressor and extend its service life, it is recommended to refer to the following maintenance cycle: Routine maintenance items: clean the air filter element, replace
Screw air compressor operation procedures: 1. preparation before starting: 1. Check whether the parts of the air compressor are in good condition, and whether the protection devices, instruments, valves, pipelines and joints are damaged or loose. 2. Slightly open the bottom of the oil and gas barrel
In today's era of increasing emphasis on environmental protection and energy saving, oil-free water lubrication air compressor head with its unique advantages, has become the first choice of many industries. As a leader in the compressor field, Shanghai Granklin Group produces more water-lubricated screw air compressors.
When the oil-free air compressor is designed and manufactured, no lubricating oil is used in the compression chamber, so theoretically, the oil will not directly contact the compressed air during the compression process. However, this does not mean that the compressed air produced by the oil-free air compressor is completely oil-free. In fact, due
In dairy production, compressed air is widely used in many key links, as follows: 1. raw material handling and conveying Milk pump drive: In the milk collection stage, compressed air is used to drive the milk pump to quickly and safely extract fresh milk from the cow to the milk storage
The general range of workshop air pressure is usually set between 0.7MPa and 1.0MPa, which is to ensure the normal operation of equipment and processes. For the machining workshop, the pressure requirement of air pressure is generally between 0.5 and 0.7 MPa (MPa), which can meet
The choice of air compressor oil or not is not a simple question, but needs to be considered according to the specific application scenarios and needs. The following is a comparative analysis of oil-free air compressors and oil-free air compressors to help you understand the advantages and disadvantages of the two more clearly:
The start and stop sequence of air compressor, cold dryer and suction dryer is very important to ensure the quality of compressed air and the stable operation of the system. The following is the recommended start-stop sequence: Start sequence Start the cold dryer: The main function of the cold dryer (freeze dryer) is to reduce the pressure
When providing compressed gas, air compressors need to meet different industry standards to meet the needs of various application scenarios, of which industrial grade and food grade are the two main classification standards. Industrial air compressor standard: industrial air compressor is mainly used in manufacturing, construction, chemical industry
Q: Will the food factory use an air compressor? A: Yes, the food factory will use an air compressor. In food plants, air compressors are often used to drive pneumatic equipment and tools, as well as to provide compressed air for various needs in the production process. For example, air compressors can
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
