2026-04-14Views：
Cold dryer is not a part of the air compressor, but with the air compressor supporting the use of post-processing equipment.
cold dryer, the full name of the refrigerated dryer, is the use of the principle of freezing dehumidification, the saturated compressed air from the upstream air compressor through the heat exchange with the refrigerant, cooling to a certain dew point temperature, while condensing out a large amount of liquid water, and then automatically discharged out of the machine after separation by the gas-liquid separator, so as to achieve the effect of water removal and drying. It is an indispensable air source processing component in pneumatic systems and is widely used in industrial fields that require dry compressed air.
Air compressor, full name air compressor, is a device that compresses air to a higher pressure. It is the core equipment of the pneumatic system, providing power source for various pneumatic tools and equipment. The compressed air discharged from the air compressor often contains moisture, oil and impurities. If these components are not treated, they may cause corrosion, blockage and failure of subsequent pneumatic equipment. Therefore, as the supporting equipment of the air compressor, the cold dryer plays an important role in purifying the compressed air and improving the air quality.
In short, the cold dryer is an important equipment used to deal with compressed air in the air compressor system, but it is not a part of the air compressor, but complements the air compressor to form a complete pneumatic system.
Screw-type air compressors perform well in many aspects. The following is a detailed analysis of their performance: High reliability: The structure of the screw-type compressor is solid. Although there are many parts, it can be ensured through reasonable design and manufacturing. The reliability of operation is relatively
The slow pumping of air compressor may be caused by a variety of reasons. The following are some common reasons and corresponding solutions: Common reasons Pollutant blockage: Air inlet or filter system accumulates dust, grease and other pollutants: These impurities will restrict the smooth flow of gas, and then
The calculation of equipment gas consumption is the core link of air compressor selection and air compressor room design, and it is necessary to comprehensively consider the factors such as equipment gas consumption parameters, simultaneous utilization rate and pipeline loss. The following are detailed calculation methods and steps: 1. basic calculation: gas consumption of a single equipment
Technical Analysis and Selection Suggestions for Permanent Magnet Variable Frequency Air Compressor and Power Frequency Air Compressor In the field of air compression equipment, permanent magnet variable frequency air compressor and power frequency air compressor are like the difference between "smart car" and "traditional fuel car", and their technical characteristics are straight.
Oil-free air compressor, as the name suggests, is an air compressor that does not require oil lubrication during operation. This kind of air compressor is mainly used to provide power or compressed air, and is widely used in various scenarios that require air sources but require avoiding oil pollution. Oil-free
The maintenance cycle of a screw air compressor depends on many factors, including the type of equipment, the working environment, the frequency of use, and the manufacturer's recommendations. The following is a comprehensive maintenance cycle guide based on a variety of information: 1. the first maintenance cycle of a new machine:
The air compressor does not pump air (or called "unable to pump air", "insufficient pressure", etc.) may be caused by a variety of reasons. The following are some common causes and their corresponding solutions: 1. electrical problems Power lines or power switches
There are several main differences between oil-free compressors and oil-free compressors: Lubrication: Oil-free compressors do not require lubricating oil to lubricate their moving parts during operation, but use specially designed seals and bearings to ensure oil-free operation. Compressor with oil
In the search for an efficient, stable and environmentally friendly medium pressure screw air compressor, Shanghai Granklin Group is undoubtedly one of the most high-profile brands in the market. The group focuses on the development and production of air compressor technology, and its water-lubricated medium-pressure screw air compressor is based on its unique
Air compressor with its efficient and stable performance is widely used in various industries. The following are some industries that mainly use air compressors: Industrial manufacturing: Air compressors are widely used in industrial manufacturing, such as automobile manufacturing, electronic manufacturing, and textile manufacturing
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
