2026-04-10Views：
The normal range of the vibration value of the air compressor host depends on the specific equipment model and application scenario. In general, here are some common reference ranges for vibration values:
for the main compressor types such as screw air compressor or axial flow turbine, under normal operation, the horizontal vibration value should not exceed 0.2mm (base vibration), and the vertical vibration value should not exceed 0.3mm (main shaft vibration). These standards apply primarily to vibration measurements under normal operating conditions.
For motors, the general vibration range should be within 3 channels (I. e. 0.03mm). In particular, such as 75kw air compressor, the standard vibration value in specific test conditions (such as the ISO2372 10-1KHz range) have specific provisions, the better vibration value range is 2.0-4.5 mm/s, excellent vibration value range is 0.45-1.8 mm/s.
There are also some views that the head vibration value of the air compressor should be less than 7.5 mm/s, but this may vary depending on the type of air compressor or application scenario.
International standards stipulate that the vibration speed of mechanical equipment should be less than 2.5 mm/s, and exceeding this value may be regarded as abnormal.
It should be emphasized that these vibration values are for reference only, and specific vibration standards may vary according to different manufacturers, models and specifications. In order to ensure the normal operation of the air compressor and prolong the service life, the vibration value should be monitored regularly. Once abnormal vibration is found, corresponding measures should be taken in time, such as maintenance, repair or replacement of parts.
In general, for a specific air compressor, the most accurate and safe practice is to refer to the manufacturer's operation and maintenance manual, understand and follow the vibration value regulations for the equipment.
Air compressor use: As an important form of energy generation, air compressor is widely used in all aspects of life and production. Common uses of air compressors: 1. Air compressors can be used for high-pressure air blasting coal mining 2. Air compression
The displacement is how much compressed air this air compressor can "spit" out per minute. You can think of it as the water outlet speed of a water pipe-the greater the displacement, the more compressed air the machine can produce per minute, and the more "vigorous" the work ".
The quality standards of compressed air for pharmaceutical use are very strict to ensure the safety and reliability of the pharmaceutical production process. The following is a detailed summary of the quality standards of compressed air for pharmaceutical use: 1. Main standard indicators Cleanliness Solid particles: compressed air for pharmaceutical use
In chemical, pharmaceutical, food and many other industries, oil-free screw air compressor is widely favored for its clean and efficient characteristics. When it comes to which brand of oil-free screw air compressor is more respected, the water-lubricated screw air compressor produced by Shanghai Granklin Group
The difference between oil-free screw and micro-oil screw air compressor is mainly reflected in the following aspects: Working principle and structure: Oil-free screw air compressor does not contact oil at all during compression. There is no direct contact between its rotors, there is a certain gap, and dependent
The compressed air standard for food factories mainly involves the following aspects: Oil content: The food-grade compressed air standard requires an oil content of less than 0.1 mg/m & sup3;. This is to ensure that the oil in the compressed air does not contaminate the food. Water content: food
The replacement cycle of the filter element of the air compressor varies depending on the model, the use environment and the working conditions. Typically, cartridge replacement is determined based on run time, differential pressure, or a combination of both. The following are general guidelines: Running time: Xu
The demand pressure of industrial compressed air varies for different applications and industries. The following is an overview of some common industrial compressed air pressure requirements and their application scenarios: General requirements: The compressed air pressure commonly used in industry is usually 0.7Mpa
Power plant compressed air oil content standard and advantages of Gellanklin water lubricated screw air compressor In power plant operation, the oil content of compressed air is the core index to measure air quality, which directly affects equipment safety and production efficiency. ISO8573 and industry according to international standards
Oil-free screw air compressor standards mainly include national standards, industry standards, design requirements, performance parameter requirements, energy saving and environmental protection requirements, and safety and reliability requirements. The following is a detailed analysis of these standards: 1. national standard GB
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
