What is the air oil content ppm of the micro-oil screw compressor

The oil content of the air of the micro-oil screw compressor varies due to many factors, but usually does not exceed a certain standard. The following is a detailed answer on the oil content of micro oil screw compressor air:

oil content under standard conditions:

under standard conditions, the oil content of the air of the micro-oil screw compressor is generally not more than 5ppm. However, this is only a rough standard, and the actual oil content may vary depending on the brand, model and conditions of use.

Oil content in practical application:

in practical applications, the discharge oil content of the micro-oil screw compressor usually contains 30 to 40 mg of oil per cubic meter of compressed air. This range can be converted into ppm units, that is, 30ppm to 40ppm. However, please note that this is only an average value, and the specific oil content may vary depending on the equipment and the use environment.

Influencing factors:

the operating temperature and operating environment of the air compressor will affect the oil content. The higher the temperature of use and operation, the oil content may also increase. In addition, factors such as the state of the oil core, whether the oil return line is blocked, and the pressure of the compressed air line system may also affect the oil content.

Special criteria:

in some cases, such as the food, pharmaceutical, and electronics industries that require higher compressed air quality, the exhaust gas content may be required to be lower than a lower standard, such as 1 mg/m & sup3; or lower.

In summary, the oil content of the air of the micro-oil screw compressor does not have a fixed value, but is affected by many factors. When selecting and using a micro-oil screw compressor, whether its oil content meets the requirements should be evaluated according to specific needs and application scenarios.