2026-04-10Views：
Air compressor national standard mainly involves the following aspects:
1. basic performance requirements
pressure, temperature and flow rate: The national standard of air compressor specifies the performance parameters such as pressure, temperature and flow rate of air compressor to ensure the normal operation and high efficiency of air compressor.
Vibration and noise: The national standard limits the vibration and noise of the air compressor to ensure that it will not cause adverse effects on the surrounding environment and users during use. Specifically, the noise should not be greater than 85dB during normal operation.
2. safety requirements
the mechanical temperature of each part of the compressor should be controlled within the allowable range to prevent the danger caused by over-temperature.
The national standard also puts forward requirements for the safety valve and other safety devices of the air compressor to ensure that the pressure can be released in time under excessive pressure or other abnormal conditions to protect equipment and personal safety.
3. structure and material requirements
the national standard of air compressor also stipulates the structure and materials used in the air compressor, requiring that the structure should be reasonable and firm, and the materials should meet relevant standards to ensure the stability and durability of the air compressor.
4. volumetric efficiency
volumetric efficiency refers to the ratio of the compressor from the inlet end to the exhaust gas with respect to the theoretical volume. The national standard specifies the volumetric efficiency requirements of the air compressor, which is one of the important indicators to measure the performance of the air compressor.
In addition, for ordinary air compressors, the national standard also stipulates that the oil content in the exhaust shall not exceed a certain limit, usually the liquid oil content shall not exceed 5 mg/m & sup3;, and the oil vapor content shall not exceed 0.5 mg/m & sup3;, To ensure the quality of compressed air and the normal operation of the air compressor. For micro-oil air compressors, the oil content in the outlet air shall not be higher than 0.01 mg/m & sup3;, while the oil content of oil-free air compressors is considered to be close to 0.
In general, the national standard for air compressors specifies a series of requirements on air compressor performance, safety, structure and materials, and environmental protection to ensure that the quality, safety and environmental performance of air compressors meet certain standards. These regulations are of great significance for protecting the safety of users, maintaining the normal operation of equipment and protecting the environment.
Want to air compressor can be longer life, long-term use? Granklin air compressor with you from the following multiple levels to analyze. 1. Select a high-quality air compressor air compressor performance indicators and service life lies in the design level. Appropriate design
1. The working principle is different. The working principle of the scroll air compressor The main components of the scroll compressor are two involute scroll coils with the same shape but the angular phase position is relatively staggered by 180 °. One is a fixed coil, and The other is carried by an eccentric shaft
There are several main differences between scroll air compressor and screw air compressor, as follows: Design principle: scroll air compressor is composed of two double function equation type lines of dynamic and static scroll meshing with each other. In suction, compression
The air pressure of the factory air source will be determined according to different application requirements and equipment specifications, so there is no fixed value. However, some common air pressure ranges can be given for reference: industrial air source pressure: air: generally between 0.1 ~ 1.0MPa
Screw air compressors are generally not recommended for frequent start-up. Frequent start-up may cause additional burden and wear on the electrical system, motor and mechanical parts of the air compressor, shortening its service life. In addition, the current impact at startup may also stabilize the grid.
The calculation of the maximum gas production of the air compressor needs to be combined with specific parameters and scenarios. Common methods include theoretical formula calculation, empirical formula estimation, power conversion algorithm and measured correction method. The following is a detailed introduction: the calculation formula of gas production of the air compressor is calculated 1. to the theoretical formula.
The application of compressed air in the production of solid preparations (such as tablets, capsules, granules) in the production process, compressed air as a key power source and process medium, is widely used in many core links. Grantkering Water Lubricated Single Screw Air Compressor
There are significant differences between oil-injected compressed air (take oil-injected screw air compressor as an example) and oil-free compressed air in many aspects, including lubrication mode, use environment, structural characteristics, energy efficiency and compressed air quality. The following is a detailed description of these differences.
Oil-free air compressor does not need lubricating oil to participate in the working process, so its compressed air quality is high. It is mainly used in industries with high compressed air quality requirements, such as laboratories, medical industry and mask production. Why choose oil-free air compressor, how to choose
Screw air compressor and oil-free air compressor have their own advantages and applicable scenarios, the specific choice of which type of air compressor is better depends on the needs of users and the working environment. Screw air compressor: advantages: screw air compressor has the characteristics of high efficiency, reliability and long life
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
