2026-04-09Views：
After a period of time, the after-sales personnel of the screw air compressor will overhaul the air compressor once, replace some filter materials with short time periods of the air compressor once, and overhaul and maintain the air compressor.
1. Clean the air valve, clean the valve seat and valve cover carbon deposits, clean the lubricating oil filter and filter screen, and check the movement structure.
Air compressor
2. Clean the filter. The filter installed in a dusty place should be cleaned to reduce cylinder wear.
3. Filter the air compressor oil every 2000h to remove metal chips and dust impurities. If the oil is not clean, change the oil and conduct a comprehensive inspection of the gap of the entire machine.
Long-term idle maintenance: Most factories will be equipped with some spare air compressors, which will not be used for a long time (usually sealed up), but too long idle will still reduce the function of the air compressor or even make it difficult to use. When the air compressor is idle, the air compressor should be maintained.
1. Before the unit is sealed, the specified amount of moisturizing cream shall be filled as required. If the idle period exceeds 6 months, the moisturizing cream shall be refilled. Readd the moisturizing cream before driving.
2. Before the unit is put into operation again, clean the grease of the oil seal, wash it with kerosene or gasoline, and then add new oil.
Compressed air is widely used in the medical field, specifically used in the following areas: 1. life support system Ventilator: Compressed air is an important source of power for the ventilator, used to drive the ventilator to generate airflow to help patients breathe. especially in the intensive care unit
Air compressor air volume and flow of the relationship and Shanghai Grankering Group air compressor product analysis 1. Introduction In industrial production, air compressor as an important power equipment, for a variety of pneumatic tools and machinery to provide the required power source. Air pressure
As a kind of equipment that compresses and stores air, air compressor is widely used in many industries and fields. The following are the main application scenarios of air compressors: 1. Industrial production of pneumatic tools and power: air compressors are pneumatic tools (such as pneumatic drills, pneumatic screwdrivers, spray
Air compressors are widely used in industry, mainly in the following aspects: 1. power supply drives pneumatic tools and equipment: air compressors can provide power for pneumatic tools such as pneumatic wrenches, pneumatic drills, pneumatic screwdrivers, pneumatic grinders, etc. These
The selection of power frequency air compressor and permanent magnet air compressor should be combined with the specific use scenario, budget and long-term operating cost. The following is a comparative analysis and selection of the two recommendations: 1. Working principle and energy efficiency of power frequency air compressor: the use of traditional asynchronous motor, through the adjustment
The energy efficiency of scroll compressors and screw compressors depends on the specific working conditions and needs. Overall, both have their own advantages. Scroll compressor: high efficiency at part load: Scroll compressor has high efficiency at part load, especially
The working pressure of various types of equipment is not uniform. Generally speaking, the working pressure of the air compressor is usually in the range of 0.7MPa to 1.0MPa. In addition, the air pressure of the immovable air compressor is generally 8kg to 12kg, while the air pressure of the piston air compressor is generally 30kg.
When the water vapor of the air compressor is more, it can be solved from the following aspects: 1. check and maintain the installation of the drainage system and regularly check the drain valve: install the drain valve at the bottom of the air tank of the air compressor to ensure that the condensate can be smoothly discharged. Periodic inspection
Technical description of compressed air parameters for air separation plant Air separation plant (air separation plant) as the core device of industrial gas production, its operation needs to be matched with compressed air system as the source of feed gas supply. In order to ensure separation efficiency and product quality, the compressed air needs to be full.
When discussing the pressure range of general air compressors, we have to mention the water-lubricated screw air compressor products produced by Shanghai Granklin Group. As a high-tech enterprise with independent intellectual property rights in the field of air compressors, Granklin Group's products are known for their excellence.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
