2026-04-09Views：
The stability of the scroll air compressor is similar to that of the screw machine, the exhaust is stable, and the failure rate is very low.
But not the scroll machine price is lower and there is no lose the quality of the screw machine can replace the screw machine?
In fact, it is not, the principle of scroll air compressor limits it can only be in small models (15KW and below) inside the advantage.
If you are higher, you can only choose a screw machine. Therefore, this kind of machine is a very good choice whether it is to replace the piston machine or the screw machine in the small model.
Screw air compressor can work continuously without stopping, especially some specific models, such as water-lubricated oil-free screw air compressor, can run for a long time. When the pressure reaches the set value, the air compressor can automatically stop, and the permanent magnet variable frequency air compressor will run at low speed. In addition, the snail
The biggest feature of permanent magnet variable frequency air compressor is energy saving. General energy saving effect of 8% and above. It mainly depends on the working conditions and the parameters of the inverter. When the customer's gas pressure is unstable and fluctuates greatly, the energy saving effect is better. 2, gas.
Oil-free screw air compressor is not really oil-free, but its oil content is very low, can reach 0.01ppm or less. This air compressor uses special coatings or materials to reduce or eliminate the parts that need lubricating oil, so that oil pollution is not generated during the compression process
Oil-free air compressor does not need to add oil at all in the compression chamber of the main engine, but some mechanical transmission parts (such as motor bearings, gearbox, etc.) still need regular lubrication and maintenance. The following is a specific analysis: 1. host compression cavity: the core design technology principle without refueling: Oil-free air compressor
When the oil-free air compressor is designed and manufactured, no lubricating oil is used in the compression chamber, so theoretically, the oil will not directly contact the compressed air during the compression process. However, this does not mean that the compressed air produced by the oil-free air compressor is completely oil-free. In fact, due
The time to change the oil of a new air compressor depends mainly on the type of oil used and the manufacturer's recommendations. Generally speaking, the newly purchased air compressor should be replaced with new oil after 500 hours of operation for the first time. Subsequently, the replacement cycle varies depending on the oil type: mineral oil
There are many hidden dangers in the operation of the air compressor, which may come from the design of the equipment itself, operating conditions, maintenance conditions and the behavior of the operator. The following is a detailed analysis of the safety hazards of air compressors: 1. equipment design and
Screw air compressor, is a kind of air compressor, there are two kinds of single and double screw. The invention of the twin screw air compressor is more than ten years later than the single screw air compressor, and the design of the double screw air compressor is more reasonable and advanced. Double screw air compressor overcomes the single screw air compressor does not
Compressed air is widely used in industrial production. As a clean, efficient and easily available energy, it plays an important role in many fields. The following are several main applications of compressed air in industrial production: 1. as a power source to drive machinery
Oil-free and oil-free air compressors have their own advantages and disadvantages, which are described separately below: Oil-free air compressor: Advantages: Good lubrication effect: Oil lubrication can effectively reduce the wear of mechanical parts and extend the life of equipment. Cooling effect: lubricating oil can take away the compression process
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
