2026-04-13Views：
The difference between oil-free and micro-oil is mainly reflected in the following aspects:
In summary, there are obvious differences between oil-free air compressors and micro-oil air compressors in terms of lubrication methods, application areas, and maintenance costs. Users should be based on specific application needs, air quality requirements and cost budget to consider.
In the compressed air system, the pipeline is the key component of gas transmission, and its pressure resistance level should be scientifically matched with the working pressure of the air compressor to ensure the safe and stable operation of the system. Granklin water lubricated screw air compressor rated pressure
In the blow molding process, the typical range of compressed air pressure is 0.2~1.0 MPa, and the specific value needs to be dynamically adjusted according to the type of plastic, parison temperature, product structure and process requirements. By providing clean, oil-free compressed air, oil-free air compressors become
Whether the air compressor needs water mainly depends on its cooling method, and the choice of cooling method is closely related to the power of the equipment, the working environment and the use demand. The following is a detailed analysis: the cooling method of 1. air compressor and the reason for water use. The principle of air-cooled air compressor: through air
In the process of chip manufacturing, the quality requirements of compressed air are extremely strict, which are directly related to the cleanliness of the production environment, the stable operation of the equipment and the quality and yield of the final product. The following is a reorganized and rigorously expressed compressed air for chip manufacturing.
The following industries have a large demand for air compressors, and Granklin water-lubricated single-screw air compressors can meet the core needs of these industries by virtue of their oil-free, clean, and stable characteristics: 1. Manufacturing (such as Mechanical processing, automobile manufacturing) The manufacturing industry is the air compressor
The air compressor itself is not directly regarded as special equipment. However, when the parameters of pressure vessels such as gas storage tanks exceed a certain range, these vessels will be regarded as special equipment. In China, according to the Special Equipment Safety Law and related regulations, special
Q: Air compressor and cold dryer shutdown sequence? Answer: Under normal circumstances is to open the cold dryer, and then open the air compressor. When shutting down, the air compressor is turned off first, and then the cold dryer is turned off. If the order is wrong, try not to have it in industries with high gas requirements. If the order is wrong, it will be empty.
The specification name and design points of the special room for the air compressor are usually called the air compressor room or the compressor room, which is the core infrastructure of the enterprise air source system. Granklin water-lubricated single screw air compressor as oil-free lubrication
There is a close relationship between the air output of the air compressor and the pressure. The following is a detailed explanation of the relationship between the two: Definition: Air output: refers to the amount of air discharged from the compressor per unit time, usually the volume of exhaust per unit time
When discussing industrial equipment, especially key equipment such as water-lubricated screw air compressors produced by Shanghai Granklin Group, it is essential to understand the unit of gas consumption of the equipment. The unit of gas used by the equipment varies depending on the application scenario and the type of equipment.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
