2026-04-13Views：
There is a real risk of icing. Since the water-lubricated air compressor uses water as a lubricant, under low temperature conditions, if the moisture in the equipment is not discharged in time or appropriate heat preservation measures are taken, the lubrication water may freeze. This will not only affect the normal operation of the air compressor, but also cause serious consequences such as pipeline blockage and component damage.
In response to this problem, Shanghai Grankering Group has fully considered anti-freezing measures when designing products. When using, users should follow the instructions in the operation manual, regularly check and drain the water in the air compressor to ensure that the system is dry. In addition, when used in winter or cold areas, it is recommended to install a heater, and the controller automatically controls the internal temperature of the machine to prevent moisture from freezing.
At the same time, the external lubricating water pipeline also needs to do a good job of cold protection and warmth preservation to ensure smooth external water inflow and avoid high temperature caused by water shortage of the main engine. These measures will effectively reduce the icing risk of water lubricated air compressor in low temperature environment and ensure the stable operation of the equipment.
In short, although there is a risk of freezing in a cold environment, this risk can be effectively controlled through reasonable operation and maintenance. The water-lubricated screw air compressor produced by Shanghai Granklin Group provides users with reliable compressed air solutions with its excellent performance and perfect oil-free air design.
The daily maintenance of the air compressor includes the following aspects: Regular replacement of the filter element: The filter element is a key component of the air compressor and is responsible for filtering the air entering the compressor. In order to maintain its filtering effect, it needs to be replaced regularly. At the same time, check the filter element
In the food and beverage industry, the water-lubricated air compressor of Shanghai Grankering Group is widely used and outstanding due to its oil-free, energy-saving and environmental protection characteristics. The following is a detailed introduction to the product, combined with a comparative analysis of industry applications: Granklin Water Run
The maintenance of screw air compressor is very important, it involves many key links, and every step can not be ignored. The following are maintenance suggestions for screw air compressors: regular replacement of three filters and one oil: including air filter element, lubricating oil filter element, oil and gas
There may be many reasons for the slow air intake of screw air compressors. The following are some common reasons and corresponding solutions: 1. common reasons The air filter is blocked. The air filter may accumulate a large amount of dust and impurities after long-term use. Hindering the normal entry of air
Air compressor installation diagram, there is an air compressor, two or more gas storage tanks, so in this case, the correct method of pipeline installation, Figure 1 installation method is two gas storage tanks in parallel, Figure 2 installation method is two gas storage tanks in series. The parallel connection is equivalent to saying that it is the sum of the volumes of the two air storage tanks. This installation form is equivalent to buying a large air storage tank, which can store more compressed air and reduce the loading and unloading of the air compressor. The number of times protects the air compressor and increases the service life of the air compressor; and the connection in series.
The gas production unit of the air compressor is usually expressed in "cubic meters per minute" (m & sup3;/min) or "liters per minute" (L/min). These units describe the volume of compressed air that the compressor can produce per unit of time.
The compressed air of 0.6MPa is not absolutely safe in the production process, and its safety depends on the specific use scenario, equipment condition, operation specification and whether the protective measures are in place. The following is a detailed analysis of its safety: the risk of compressed air itself pressure wind
Compressed air plays a vital role in the electronics manufacturing industry. Its uses are wide and diverse, mainly covering the following aspects: 1. Pneumatic equipment drives automated production lines: compressed air provides power for pneumatic actuators, cylinders, pneumatic fixtures, etc. Drive automatic
Oil-free screw compressor and oil-injected screw compressor are two different types of compressors, which are different in working principle, use occasion and characteristics. The working principle of oil-free screw compressor: The working principle of oil-free screw compressor is based on
The maintenance price of screw air compressor varies due to factors such as brand, model size, power, and accessories that need to be replaced. Generally speaking, the maintenance cost of imported brands will be higher than that of domestic brands, because the price of imported accessories is more expensive and the maintenance time is relatively long.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
