2026-04-13Views：
The pressure of the plant gas supply usually depends on the specific application needs and equipment specifications. Generally speaking, the pressure of industrial air supply is usually between 0.6MPa and 1.0MPa, which is a relatively general range and is suitable for most pneumatic tools, automation equipment and other conventional applications.
However, certain applications, such as heavy machinery or certain process equipment, may require higher supply pressures, such as up to 1.2MPa or higher. Conversely, for certain lightweight applications, only a lower gas supply pressure, e.g., 0.5MPa or less, may be required.
In addition, the air supply pressure of the air compressor also needs to be slightly higher than the equipment requirements to compensate for the pressure drop loss in the pipeline. Generally, the pressure of the air compressor station in the factory will be controlled at about 0.8MPa to ensure that the air source pressure supplied to the equipment is between 0.6 and 0.7MPa.
In general, the plant air pressure is not a fixed value, but is determined according to the actual application requirements and equipment specifications. To ensure that job requirements are met and efficiency is maintained, the relevant engineer or equipment supplier should be consulted for accurate air supply pressure requirements.
The main reasons why the screw machine is not suitable for flammable and explosive gases are as follows: Working principle and safety risks: The working principle of the screw machine is to compress the gas through the rotation of the screw. In this process, the gas is highly compressed and generates heat
Air compressor without oil and oil which is good, in the end which to choose? 1, from the current implementation of the oil-free air compressor to pay more attention to environmental protection, because the oil-free air compressor in the operation process does not need oil to do lubrication. And oil air compressor is different, if there is no oil host
Professional Interpretation of Compressed Air Pressure Range 0.6-0.8MPa Compressed air is a widely used power source in the industrial field, and its pressure parameter setting is directly related to equipment operation efficiency and production safety. Now on the 0.6-0.8MPa pressure range of technical connotation and should be
The use of industrial compressors is extremely wide, covering almost all aspects of industrial production. The following are some of the main application areas: 1. Industrial production power source: Compressors can be used to supply compressed air to power tools, production equipment and machinery, such as air compressors, pneumatic
In industrial production, air compressor is one of the key equipment, and its output compressed air moisture content directly affects the stability of the subsequent process and product quality. Therefore, controlling the moisture content in the air compressor has become the focus of the industry. Shanghai Granklin Group
Q: air compressor belongs to which category? A: belong to the general mechanical category of mechanical and electrical equipment. The "water-lubricated screw air compressor" produced by Shanghai Granklin Group almost covers our daily necessities, medicines, food, textiles
Among the many air compressor brands, which one to choose has become a problem faced by many users. If you are looking for an efficient, environmentally friendly and high-quality air compressor, the water-lubricated air compressor produced by Shanghai Granklin Group is undoubtedly your wise choice. granklin, shanghai
The air pressure range of air compressors varies according to types and application scenarios. The common range is between 0.7MPa and 1.25MPa, which can be specifically divided into the following categories: 1. low-pressure air compressors are classified according to exhaust pressure: exhaust pressure ≤ 1.0MPa, which is suitable for occasions with low air pressure requirements, such as air pressure
The air compressor will produce condensed water during operation, which is due to the water vapor in the air condensing into water droplets during the compression and cooling process. Timely discharge of these condensed water is essential for maintaining the normal operation of the air compressor system and preventing moisture from causing damage to downstream equipment.
In the power plant, thermal control, boiler operation and maintenance, turbine operation and maintenance, chemical water treatment, electrical engineering and mechanical maintenance and other professional will use air compressor, its application throughout the power supply, equipment control, process operation and maintenance of the power plant.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
