2026-04-10Views：
The following is a brief description of the specific matters of air compressor inspection and maintenance
1. The air compressor maintenance personnel shall deal with the recent operation of the machine and the corresponding problems according to the reflection of the crew;
2. Air compressor maintenance Check whether there is water leakage, air leakage and oil leakage in the air pressure system, and stop the machine for maintenance if necessary;
3. When overhauling the air compressor, check the normal drainage of the automatic drainage device, air storage cylinder, dryer and filter of the air compressor. Whether the discharged water is in normal condition, and if there is blockage and flying oil, deal with the relevant components;
4. During the maintenance of the air compressor, the ambient temperature, ventilation and heat dissipation inspection records shall be made, and suggestions for improvement shall be put forward if necessary;
5. Check and record the exhaust pressure of the air compressor during maintenance, adjust the pressure switch and regulating valve when necessary, and check the maintenance system when abnormal;
6. Air compressor maintenance exhaust temperature inspection records, if necessary, clean the radiator;
7. Air compressor maintenance operation time check records, confirm the use time of consumables, and put forward the regular replacement of consumables plan;
8. Air compressor "Maintain the compressor head outlet temperature inspection records, check the temperature control components if necessary, and clean the radiator.
9. Air compressor maintenance tank pressure inspection records, if necessary to adjust and replace the small pressure valve.
10. Air compressor maintenance oil and gas separator, oil separator and other pressure difference inspection; abnormal check whether the system failure, after the repair of oil and gas separator, and regular replacement.
11. Air compressor maintenance air filter condition inspection records, and regular cleaning; if necessary, replace.
12. Regularly check the quality of the oil during the maintenance of the air compressor; add and replace it if necessary.
air compressor pipeline maintenance:
1. Preventive measures for pipeline vibration. When designing compressed air pipelines, bends, valves and reducers should be reduced as much as possible, or the curvature radius of the pipe bending should be greater than one, so as to reduce the exciting force. When installing the equipment, it should be installed in strict accordance with the design requirements. For pipelines that are in use and have vibration, a buffer can be added at a place close to the compressor. Although the gas storage tank is also a buffer, if the volume is not large enough, it should be appropriately increased to reduce the pulsating pressure. Uniformity.
If it is found that a certain section of pipeline has strong vibration, s * first judge the cause of vibration. If it is not mechanical resonance, it can be solved by clamping or compressing a certain part of the pipeline or increasing the support of a certain part of the pipeline, but it should be carried out at the appropriate position of the pipeline.
2. Requirements for operators. Strictly implement various rules and regulations, operate carefully, and carefully fill in operation records or production art records to ensure safe production operation; When it is found that there is an abnormal phenomenon in the air compressor system, emergency shutdown measures shall be taken and reported to the superior in a timely manner. Any illegal command of harmful equipment should be refused; Efforts should be made to learn business knowledge and continuously improve operation skills.
Oil air compressor refers to the use of lubricating oil (synthetic oil or semi-synthetic oil) in the air compressor system to lubricate the machine and dissipate heat. This kind of air compressor, the compressed air will have a certain amount of lubricating oil, that is, the post-processing equipment is used for filtration, but it will still have
Those engaged in the installation, transformation and maintenance of pipelines such as gas storage tanks and other pressure vessel equipment must obtain the corresponding qualification license. Units engaged in installation must have installation qualifications, install in accordance with relevant safety specifications and requirements, and be responsible for the safety and quality of pressure vessels, and strictly implement national safety standards and technical standards.
In the field of air compressor, there are not many manufacturers that can use real frequency conversion motors. Shanghai Granklin Group produces water-lubricated variable frequency air compressors. Through the use of permanent magnet motors and variable frequency controllers, it has achieved the effect of energy saving and emission reduction. General frequency conversion means can suppress frequent loading and unloading of equipment, and can also save a lot of power, improve reliability and reduce noise. If the air compressor uses frequency conversion, it can also stabilize the system pressure.
Spraying processes are often seen in daily life, such as the surface of vehicle bodies, hardware and rubber products, and the main function is to prevent corrosion. In the painting stage often use screw air compressor to do power device. Then the painting field is on the air compressor.
Air compressor protection refers to some methods that can add the service life of the equipment, which is different from the regular maintenance, and the intention is also for the outstanding work of the whole system. Below, the technical staff will briefly introduce the following three methods
Oil-free air compressor in the domestic products, with completely independent production capacity of the enterprise "Shanghai Grencklin Group". Localization in the field of oil-free air has improved the global market competitiveness of my country's air compressor products. A steady stream of "oil-free air" supplies domestic mid-to-high-end manufacturing and production gas to produce global commodities.
The purchase of water-lubricated air compressor is to be used in the production and manufacture of oil-free equipment, and the industry with high air source requirements is often inseparable from the oil-free air compressor. This kind of enterprise procurement Shanghai granklin group of water lubricated air compressor, is the best choice.
Screw air compressor factory direct good? Air compressor is a large energy consumption for enterprises, so how to reduce procurement costs! In today's complicated relationship, contact the manufacturer to get the best air compressor price.
Air compressor safety management measures 1, air compressor must have a pressure gauge and safety valve. The pressure gauge must be calibrated regularly. The safety valve and pressure regulator must act reliably, and the operating pressure of the safety valve shall not exceed 1.1 times of the rated pressure. Use of oil
(1) To fully meet the gas consumption of gas equipment, the maximum gas consumption should be calculated according to the type and quantity of pneumatic equipment, and the gas consumption that may be increased in the future should be included, and then the air compressor that can meet the gas supply requirements of pneumatic equipment should be selected.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
