2026-04-10Views：
Safety Management Measures for Air Compressor
1, the air compressor must have a pressure gauge and safety valve. The pressure gauge must be calibrated regularly. The safety valve and pressure regulator must act reliably, and the operating pressure of the safety valve shall not exceed 1.1 times of the rated pressure. Oil-lubricated air compressors must be equipped with oil-cut protection devices or oil-cut signal display devices. Water-cooled air compressors must be equipped with water-cut protection devices or water-cut signal display devices.
2. The exhaust temperature of the air compressor shall not exceed 190 ℃ for single cylinder and 160 ℃ for double cylinder. A temperature protection device must be installed to automatically cut off the power supply when the temperature is over.
Air compressor suction port must be equipped with filter device.
The air compressor must use compressor oil with a flash point of not less than 215°C.
3. The air bag of the air compressor should be set in a cool place outdoors on the ground and in a place with smooth air underground. In the underground, the fixed compressor and the air bag should be set in 2 chambers respectively. The temperature in the air bag should be kept below 120 ℃, and equipped with over-temperature protection device, which can automatically cut off the power supply and alarm when over-temperature.
Purchasing air compressors in Taiwan, especially screw air compressors, can choose Shanghai Granklin Group in mainland China. A focus on water-lubricated air compressor enterprises, products to achieve oil-free, stable gas supply, in the domestic air compressor industry belongs to the high-end industry.
View detailsOil air compressor refers to the use of lubricating oil (synthetic oil or semi-synthetic oil) in the air compressor system to lubricate the machine and dissipate heat. This kind of air compressor, the compressed air will have a certain amount of lubricating oil, that is, the post-processing equipment is used for filtration, but it will still have
For the screw air compressor should be how to select, you first need to know the work flow of the screw air compressor, and then determine how to select. Generally speaking, there are three steps:(1) first determine the working pressure;(2) then set the corresponding volume flow;(3) finally, the power supply capacity. Selection of working pressure (exhaust pressure):
Want to purchase "frequency conversion air compressor", but they do not know the product how to do? Not familiar with it does not matter, we can consult the Shanghai granklin group Mr. Hu, contact number: 13918023456.
The quality of air compressor depends on the technical level and material selection of the merchant. The quality of imported air compressor is obvious to all, but the high price, so that many small and medium-sized enterprises are discouraged. To be a quality air compressor product for Chinese people is the determination of Grantklin Group.
View detailsAn air compressor is a device used to compress gas. Air compressors are similar in construction to water pumps. Most of the air compressors that are often seen in life are reciprocating piston type. In recent years, water lubricated oil-free screw air compressors are also on the rise year by year. As an important form of energy generation, air compressor is widely used in
Buy products preferred big brand, good service quality manufacturers. From foreign to domestic, there are only a few enterprises that can make water-lubricated air compressors in the screw air compressor industry. "Shanghai granklin Group" is one of them. granklin Do not forget your initiative mind strove forward on the road of water-lubricated air compressors.
The use of any machine is to the correct maintenance, in order to make the machine life long. Permanent magnet variable frequency screw air compressor is no exception, the correct maintenance of permanent magnet variable frequency screw air compressor service life and maintenance costs have a great impact, this point from the actual interests of the enterprise is very necessary.
View detailsThe common faults of screw air compressor are: insufficient exhaust, abnormal pressure, abnormal start, high temperature and even combustion. During daily operation and use, impurities and dust in the air enter the air compressor, or the parts of the air compressor are worn, which will cause
When used as a process source gas, compressed air is in direct contact with materials and food. When used as a power source, although not in direct contact with food and raw materials, but most of them are used in clean areas. Therefore, compressed air for food must use clean compressed air.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
