How to deal with slow pumping of air compressor

2026-04-10Views:

The slow pumping of air compressors is used by many old users of air compressors. Why is this so?

The screw air compressor needs maintenance at a certain time, and the product manual will be very detailed. How many hours of small maintenance once, about two years of major maintenance once.

The actual maintenance time is adjusted according to the working time of the screw air compressor.

When the water-lubricated air compressor encounters users with slow pumping, it is often because the machine is out of service and does not purchase original parts, so it solves the supply of parts for the screw machine by itself.

Some accessories with poor quality that cannot meet the application conditions of the water-lubricated air compressor, such as the filtering effect of the water filter element, are better than those used in the factory, so there will be no problem.

However, most of the spare parts on the market are not up to the factory-level demand, which will lead to serious wear of the air compressor head.

The same is true for air filter elements, so companies that purchase screw air compressors must pay attention to maintenance, and parts must be purchased from the original air compressor.

More Recommendations

  • 2026-04-10

    Industries where water-lubricated air compressors can be applied

    The application industries of water-lubricated air compressors produced by Shanghai Granklin Group: university laboratories, chromatographic analysis, medical pharmacy, dentistry, food processing, construction engineering, chemical industry, machinery, environmental protection, meteorology, hydropower, spraying, sandblasting, PET Bottle blowing, leak detection, metallurgy, water treatment, printing, shipping, textile, petrochemical, electronics, instrumentation, tobacco, nitrogen production.

    View details
  • 2026-04-10

    How to deal with water in air compressor

    The solution to the water in the air of the air compressor is as follows: 1. There is a drain valve at the bottom of the air compressor cooler. As long as the drain valve is opened immediately, the water inside can be drained clean. 2. You can also install a drain valve at the lowest end of the air compressor storage tank, or

    View details
  • 2026-04-10

    Oil-free screw air compressor does not contain oil instructions

    For oil-free air compressor, most people will think that the air compressor uses air compressor oil during operation and adopts post-processing filtration to remove oil. In fact, this is one of our misunderstandings about oil-free air compressors. Air compressor oil has many functions, including cooling and lubrication. The so-called oil-free air compressor of Granklin air compressor uses water lubrication, and the compressed air is 100% oil-free.

    View details
  • 2026-04-10

    What are the air compressor classification and description

    There are many types of air compressors, which can be divided into two categories according to their working principles: positive displacement compressors and speed compressors. In the volumetric press machine, the increase of gas pressure is caused by the volume of gas in the sub-press machine being reduced to make the density of air molecules per unit volume.

    View details
  • 2026-04-10

    Shenzhen specializes in air compressor factory

    Shenzhen specializes in air compressor factory, Shenzhen screw air compressor factory air compressor consumption technology and quality is also very related to the quality is not good, the machine function is greatly reduced, easy to various problems attack or use of high life expectancy, etc., so the purchase of air compressor

    View details
  • 2026-04-10

    Treatment Process of Shaft Seal Oil Leakage of Screw Air Compressor

    One of the two major faults that often occur during the use of screw air compressors is oil leakage. Oil leakage faults are divided into many kinds of organic head oil leakage and shaft seal oil leakage. The rotor of a carbon dioxide screw press in an enterprise is divided into two parts: yin and yang, with a rotating speed of 2157r/min.

    View details
  • 2026-04-10

    Troubleshooting Methods Often Encountered by Oil-free Air Compressor

    The current of the 1. oil-free air compressor is too high: the common reasons for this failure are as follows: 1. The main engine fails 2. The exhaust pressure is too high 3. The voltage is too low: Generally, the power of the oil-free air compressor is Rated, therefore, according to the public

    View details
  • 2026-04-10

    Water-lubricated oil-free air compressor for laboratory pharmaceutical industry food industry

    The choice of oil-free series compressor is to choose a clean, reliable and economical gas source, which can greatly promote your business development and ensure your profitability! In many applications, air cleanliness is critical, because even a small drop of oil

    View details
  • 2026-04-10

    Permanent magnet variable frequency air compressor advantages and disadvantages

    As we all know, there are many types of air compressors, one of which is called permanent magnet variable frequency air compressor, which is also the highest sales volume in the selection of air compressors, and the number of "fans" is also very large, so let's learn about the advantages and disadvantages of this permanent magnet variable frequency air compressor.

    View details
  • 2026-04-10

    Inert gas special gas water lubricated air compressor

    The water-lubricated compressor produced by Shanghai Granklin Group generally uses air as the compression medium. This is because it is compressible, clear and transparent, and it is convenient to transport (non-condensing), harmless, safe, and inexhaustible. An inert gas is a gas that has no chemical effect on the environment, and a standard compressor can compress an inert gas as well.

    View details