Treatment method of slow pumping of screw air compressor

Screw air compressor pumping slow how to deal with, screw air compressor pumping slow power low generally have the following reasons:

screw air compressor pumping slow how to deal?

1. Host problems. Check the air supply power of the main machine of the equipment, close the valve behind the air storage tank and pump air into the air storage tank. From display loading to unloading, record the time. Calculate according to the volume of the air storage tank and the air production on the nameplate of the screw air compressor, and draw a conclusion.

2, gas consumption increased, gas consumption is greater than gas production. Carefully check whether there is air leakage in the airway pipeline and equipment; Whether the installation is reasonable, the screw press and the gas equipment cannot be too far away; Check whether there is new gas equipment. If there is no gas equipment, it can be judged that the selection of screw air compressor is small. At this moment, we can solve the problem by adding equipment.

3. Check whether the air filter is blocked. The air compressor needs to sort out the air filter regularly during use. Where the operating environment is not good, the replacement period should be appropriately shortened. Check the pressure sensor of the screw air compressor, can close the valve behind the air storage tank or encourage it in the shutdown state, and whether it is normally loaded and unloaded within the set pressure.

4, the intake and exhaust valves show problems, can not be completely opened. Check whether the intake and exhaust valves are completely opened and whether adjustment is required.

The above is the main reason for the slow pumping of the screw air compressor and the specific solution.