Laser cutting air compressor procurement matching water lubricated air compressor

Granklin air compressor is suitable for laser cutting machine. Compared with traditional oil air compressor, water lubricated air compressor has higher gas purity. Laser cutting products are suitable for high-end industry processing, intelligent robots, etc.

Water lubricated air compressor has high gas production and clean gas without oil.

A single large air volume air compressor is much better than multiple small air volume air compressors in terms of overall energy efficiency, which is a common feature of any type of air compressor.

Therefore, the principle of air compressor selection with energy efficiency is to choose large rather than small, but according to various levels, the choice of large air compressor is also limited by the following factors:

(1) For the limitation of the power system, the first thing that must be considered is the application voltage, and whether the impact of the large air compressor on the power grid is sufficient when starting must be considered.

(2) With the seasonal, time difference or other factors causing the change of compressed air to exceed a certain range (depending on the type of machine), or the actual use of air volume is likely to be far lower than the estimated value before the purchase of air compressor, a single air compressor will inevitably cause waste of energy due to emission or unloading. Multiple air compressors have greater flexibility to accommodate changes in dosage.

(3) Abnormal jump or necessary shutdown is the potential pressure of production pause. In order to reduce the risk of production pause, it is necessary to consider setting up a spare machine. The spare machine using a single operation will be as high as 50%.

Laser cutting special air compressor manufacturers to do the public like the air compressor brand should not only focus on the price advantage, these problems need more attention.

its advantage lies in five major advantages: integrated integration, oil-free and water-free, only material connection, adjustable pressure, and ready-to-use. It uses a one-piece integrated structure to make installation more convenient, and saves the trouble of self-equipped gas storage tank, cold dryer and filter;

save the trouble of taking over the installation, and use it when receiving electricity; Save the trouble of requiring multiple supplier services.

Greatly reduce the user's workflow, increase the efficiency of the work. Intelligent housekeeper remote monitoring, 24-hour online detection, no need for special management, open the phone can quickly get machine operation information.

When the equipment encounters failure or needs maintenance, the system will automatically send warning information.

The working principle of the special air compressor for the laser cutting machine: the high temperature and high humidity compressed air from the compressor is first exchanged with the dry low-temperature air in the heat exchanger to cool down, and then enters the evaporator for further cooling. Most of the gaseous water molecules in the evaporator are condensed into Liquid water is discharged.

Thereafter, the compressed air with a very low water content enters the adsorption drum for further drying and dehumidification to obtain a product gas with a lower dew point. Finally, the low-temperature dry air enters the heat exchanger to cool the high-temperature and high-humidity intake air, and its temperature also rises to prevent condensation outside the conveying pipeline.