2026-04-10Views：
if the maintenance of the air compressor is not timely, it will have a great impact on the air compressor. The screw air compressor will have a first guarantee for 500 hours of operation and a maintenance for 2000 hours after operation. The quality of screw air compressor oil has a decisive influence on the performance of oil injection screw air compressor.
Good oil has good oxidation stability, rapid separation, good foam cleaning, high viscosity, good corrosion resistance, therefore, users must use pure special screw oil. It is best to change the oil filter at the same time. Use in harsh environments to shorten the follow-up cycle.
Maintenance method: start the air compressor to run for 5 minutes, so that the oil temperature rose to more than 50 ℃, oil viscosity decreased. When stopping operation, when there is 0.1Mpa pressure in the oil and gas barrel, open the oil drain valve at the bottom of the oil and gas barrel and connect the oil storage tank. The oil drain valve should be opened slowly to avoid splashing with pressurized and warm lubricating oil.
Close the oil drain valve when the lubricating oil becomes dripping. Unscrew the oil filter element, drain all the lubricating oil in each pipeline at the same time, and replace with a new oil filter. Open the screw plug of the oil filler, inject new oil to make the oil level within the range of the oil mark scale line, tighten the screw plug of the oil filler, and check for leakage.
Lubricating oil must be checked frequently during use, and new oil should be added in time when the oil level is too low. Lubricating oil must also be discharged frequently during use. Generally, it is discharged once a week, and it should be discharged 2-3 days in high temperature climate. Once.
Shut down for more than 4 hours, open the oil drain valve when there is no pressure in the oil and gas barrel, drain the condensed water, and quickly close the valve when organic oil flows out. It is strictly prohibited to mix different brands of lubricating oil, and avoid overdue use of lubricating oil. Otherwise, the quality of lubricating oil will decrease, the lubrication will be poor, and the flash point will decrease, which will easily cause high temperature shutdown and cause spontaneous combustion of oil.
How to reasonably reduce the cost of the air compressor system? The cost of the air compressor system includes the purchase cost and the use cost, not only the initial purchase amount is large, but also the use cost of personnel expenses, purchase and installation costs, power consumption, maintenance and maintenance, etc. How to reasonably reduce the cost of air compressor system has become the focus of enterprises to improve profits.
Granklin Group is a domestic manufacturer of self-produced water-lubricated air compressors. We can achieve a pressure of 0.15-4Mpa. Water-lubricated air compressors can provide pure oil-free compressed air for enterprises. Energy saving inverter control of the air compressor and the traditional control of the air compressor, the energy saving version is the most important and the most important, according to the demand for compressed air to adjust the supply of air compressor running state.
View detailsThe application of air compressor in daily life can be said to be more and more extensive, but according to the current lubrication method, it can be divided into two different types of oil-free air compressor and oil lubrication. In fact, the scope of application of different equipment is not
In the textile industry, air-jet looms require dry and oil-free compressed air. In the production process, the thin nozzle blows compressed air onto the wire harness to form a vortex, which gives the yarn shape, elasticity and elasticity from the surface. The pure compressed air provided by the oil-free air compressor can ensure the quality of the finished fabric. At the same time, the air-jet loom also requires the quality of compressed air:
View detailsThrough years of after-sales maintenance practice, the author has a systematic understanding of the daily maintenance of the screw air compressor. The following provides you with some references. 1. the preparation work before starting. Prepare the post-treatment equipment before turning on the power, and check the cooling dryer.
The oil-free air compressor is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy, and is a pressure generating device for compressed air. Attention to the use of oil-free air compressor 1. When the oil-free air compressor is shut down due to power failure, in order to prevent the compressor from starting under pressure, when starting up again
Shanghai Granklin Group is engaged in the production of "oil-free air compressor", integrating R & D, production, sales and after-sales. As a member of domestic air compressors, the brand of "Granklin air compressor" has gradually occupied a place in the domestic "oil-free air compressor" market after years of operation and development.
Permanent magnet variable frequency air compressor self-start-stop fault inspection, air compressor self-start-stop problem collection, variable frequency air compressor self-start-stop fault inspection process. Shanghai granklin group specializes in producing [water lubricated air compressor] manufacturers, you need [oil-free air compressor] can contact us at any time, inquiry telephone number: 13918023456
View detailsCompressor in the general industry is a power equipment, nitrogen and hydrogen production industry is a production equipment. See where you are using it. In the chemical industry, compressors belong to the category of dynamic equipment. Air compressors belong to the general equipment category and are widely used in steel, electricity,
The medium pressure air compressor produced by Grencklin Group is widely used in the PET bottle blowing industry. The compressed gas of the water-lubricated air compressor does not contain oil, and the bottle blowing is more in line with the requirements of food safety production. PET is the most widely used beverage packaging material today. PET bottles originated in the early 1980 s. Because of its light weight, easy forming, low price, and easy mass production, it has developed rapidly with an unstoppable momentum since its inception.
View details
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
