Air compressor need to know some knowledge points

According to the market situation, most manufacturing industries need to use air compressors. For example, the food industry and the pharmaceutical industry generally use oil-free air compressors. The laser industry uses more medium pressure. The textile and chemical fiber industry uses more low pressure. For products tested by high pressure, bottle blowing industry, high pressure is generally used for experiments.

The above is the general situation direction, as for the actual production in the choice of strict standards, the choice of air compressor is based on the requirements of manufacturing equipment or gas equipment to decide, so there are three elements of air compressor selection:

1. Power

2. Flow

3, pressure

the service life of permanent magnet variable frequency air compressor is effectively extended:

due to the use of high-efficiency energy-saving control system, the software start of the air compressor reduces the electrical impact on the electrical components of the motor, and the starting current is small, which extends the life of the motor contactor. The software start of the air compressor reduces the mechanical impact on the equipment, and the motor bearings, main engine bearings and gear boxes all extend the service life.

Oil-free air compressor installation note:

1. The oil-free air compressor should be placed in a place to protect from wind and rain, and 5. It should be placed outside casually,. This will affect his life. Do not put in a gas tank and a dusty place.

2. When the oil-free air compressor is used, the air compressor should be transported back to dump the waste water left inside to keep the air compressor dry and clean.

3. Check the accessories regularly, and if the parts are damaged, find a professional to replace and maintain them immediately.

4. Do one-year maintenance and half-year maintenance.

5. Oil-free air compressor can only be used for pressurized air, under no circumstances can handle other gases, can not be used for pumping liquids, particles, solids and any flammable substances that may cause explosion.