Screw air compressor maintenance costs

How to effectively reduce the maintenance cost of air compressor?

1. Ensure the quality of equipment accessories

the quality of the equipment accessories can also determine the quality of the air compressor, and can improve the performance of the equipment, but can improve the performance of the pressure machine, and can not solve the problems in the equipment. In addition, it may cause new failures, reduce the failure of the display air compressor system, and may cause new accidents.

2. Enhanced air compressor update technology

improving the upgrading of the hot press and the improvement of new technologies can maintain the stability of the press system and the maintenance cost of the air display press.

3. Responsibility of equipment management personnel

the enterprise is required to be fully responsible for the equipment management, fully grasp the use of the equipment, have operational skills, and prepare for the acceptance and acceptance of the equipment. Touch, check and adjust frequently. Pay attention to the cause of abnormality at any time during work, adhere to the abnormal situation of empty post, sound and instrument, and change immediately and eliminate the fault.

4. Regular maintenance of air compressor

the press should be maintained regularly, preventive maintenance of the air compressor every year, maintenance of the daily maintenance of the press, carefully do it and record it.

Generally speaking, the newly bought air compressor needs routine maintenance after being used for a period of time. Just like the car, the maintenance is divided into minor maintenance and major maintenance. Minor maintenance only needs to replace the air filter, air compressor oil and oil filter. The maintenance price of screw air compressor is also determined according to the brand and size of air compressor. The maintenance price of air compressor with different brands and different power is different.

In fact, air compressor maintenance is to make the machine can better run in the best condition. Just like car maintenance, if it is well maintained, the failure rate of the machine will be greatly reduced, which not only saves the time and effort caused by frequent maintenance, but also prolongs the service life of the air compressor. It will not affect production due to air compressor failure. Therefore, the maintenance of the air compressor must be done well at ordinary times, and don't loathe to give up the maintenance money. Otherwise, it will cost a lot when the screw air compressor head is stuck with carbon glue.

Generally, the first maintenance is carried out after the new machine runs for 500-1000 hours, and the screw air filter, screw air compressor special oil and oil filter are replaced. In addition to replacing these three kinds of maintenance, the oil-gas separator core and motor grease of the air compressor should also be replaced. This maintenance is carried out about 3000 hours after the machine runs, depending on the working environment. The environment is dirty, such as a lot of dust, so the time should be shortened appropriately.

To answer this question, it depends on what brand you buy, how big cubic screw air compressor, the smaller the machine, the lower the maintenance cost, on the contrary, the cost is large; domestic brand screw air compressor maintenance costs relative to imported brand air compressor, maintenance prices are also much more affordable. Therefore, before you buy a screw air compressor, you must understand these contents and know fairly well. After all, the use cost is the large cost of the air compressor running for several years and the proportion of more than ten years.