How long should the air filter element of the air compressor be maintained?

2026-04-10Views:

The air filter element is replaced every 1000-1500 hours under normal conditions. For places where the environment is particularly harsh, such as mines, ceramic factories, cotton mills, etc., it is recommended to replace the air filter element every 500 hours.

When cleaning or replacing the air filter element, the components must be matched one by one to prevent foreign matter from falling into the intake valve. At ordinary times, it is necessary to check whether the intake telescopic pipe is damaged or flat, and whether the connection port between the telescopic pipe and the air filter intake valve is loose or leaking. If found to be timely repair, replacement.

It is better to maintain the empty filter element once a week, unscrew the gland nut, take out the empty filter element, use 0.2-0.4Mpa compressed air to blow out the dust particles on the outer surface of the empty filter element from the inner cavity of the empty filter element, and wipe the stolen goods on the inner wall of the empty filter shell with a clean cloth. Reassemble the air filter element, and the sealing ring at the front end of the air filter element shall be tightly attached to the inner end surface of the air filter housing.

More Recommendations

  • 2026-04-10

    What elements should the air compressor for biopharmaceutical use

    Biopharmaceutical is based on natural biological materials as the main raw material, including microorganisms, human body, animals and plants, marine organisms and so on. With the development of biotechnology, some synthetic biological agents have become the main source of raw materials for biopharmaceuticals. have pharmacological

    View details
  • 2026-04-10

    The implementation of centralized air supply project provides compressed air for 56 families at the same time.

    According to China Electric Power News Network on September 23, the first centralized compressed air supply project in Shaoxing Binhai Industrial Zone, Zhejiang Province, has officially landed and is about to start construction. After the completion of the project for the surrounding 56 printing and dyeing enterprises to provide nearly 3000 standard cubic meters per minute compression

    View details
  • 2026-04-10

    Energy Saving Skills of Frequency Conversion Air Compressor

    Energy saving has always been a hot topic in the whole society. How to reduce the energy consumption of enterprises and greatly improve the production quality and efficiency. Large energy consumers "air compressor" equipment often occupy most of the energy expenditure of enterprises, and the best way to save and reduce energy consumption is to use "variable frequency energy-saving air compressor".

    View details
  • 2026-04-10

    Common twin-screw air compressor workflow structure

    The screw air compressor is an oil-injected single-stage twin-screw compressor. It adopts high-efficiency pulley transmission to drive the main engine to rotate for air compression. The compressed air in the main engine is cooled by oil injection. The air and oil mixed gas discharged from the main engine are coarse and fine. Two separate

    View details
  • 2026-04-10

    Oil-free air compressor without oil or water

    The oil-free air compressor produced by Shanghai Granklin Group can compress the gas to meet the oil-free standard. Many industries with high requirements for compressed air can purchase water-lubricated air compressors: clean and dry, not allowed to contain water, oil, dust, etc. Therefore, purification of compressed air is an essential means of industrial production. Compressed air dryers and matched compressed air filters are the most effective methods for drying and filtering compressed air.

    View details
  • 2026-04-10

    Water-lubricated screw air compressor oil-free is the food industry preferred

    The specific application of screw air compressor in food and pharmaceutical fields, the application of air compressor in various industries is very extensive, but the requirements of different industries for screw air compressor are also different. The application and light of screw air compressor in food and pharmaceutical fields are introduced in detail below.

    View details
  • 2026-04-10

    Key points of correct use of oil-free air compressor

    Such as biology, medicine, electronics, food, medical, automotive, chemical and other fields, water, oil, dust, bacteria, etc. are required to reach a higher level, but the water, dust, bacteria in the compressed air can be solved by a series of post-processing equipment such as filters and dryers, and

    View details
  • 2026-04-10

    How often does the air compressor oil change?

    The replacement cycle of air compressor oil is divided into three situations: 1. Mineral oil is replaced every 3 to 4 months; 2. Semi-synthetic oil is replaced every 6 to 8 months; 3. Fully synthetic oil is replaced every 10 to 11 months. The air compressor has the following conditions

    View details
  • 2026-04-10

    How much is a 75kw air compressor?

    When purchasing water lubricated air compressors, the factory often asks about 75kW air compressors. After the sales manager Shen of Shanghai granklin group air compressor company learned about it, it turned out that this enterprise was used to produce food. because food safety was very important, our sales manager chose the new water for our customers.

    View details
  • 2026-04-10

    Brief Introduction of Common Lubrication Methods of Air Compressor

    Air compressor type variety, wide range of uses, and different types of air compressor, the lubrication requirements vary greatly. In the air compressor parts, the lubricating oil plays a role in preventing wear, sealing, and cooling, minimizing the influence of air on the viscosity of the lubricating oil and the reaction between additives and air, so as

    View details